Facing the chore of replacing the hose on my head
. Got the good hose but there are two 90 degree bends that I don't like and while the 102 hose might make the bend it's not likely to be very happy.
I have seen some PVC elbows (sch 40) that suit this purpose an provide a nice smooth transition, which makes sense for solids flow, however these unions will be below water
line and of course they carry effluent...
The Marelon offering is going to be two pieces threaded together and forming a tight 90 (nice for fit but not for flow?).
I would really appreciate some feedback. Regret that I couldn't find a thread that handled this.
Thanks much for your consideration!