Hi,
I have a
Katadyn 40E 12vdc
water maker. It was pickled for 6 months. Upon restarting the system, the relief valve blew out of the cleaning/relief valve body. After carefully
cleaning and re-assembling the valve to the body, it happened again twice, three times total. This happens nearly immediately upon start up, after few than 8-10 strokes of the
pump. Threads on the relief valve look fine, and so do the threads inside the body, such as I can see them inside.
The
watermaker was installed in November 2015. It has 360.3 run hours. Before pickling it was working fine and producing
water to spec.
Any insight would be appreciated. Thanks.