Hi - my first post to this forum.
I have an Isotherm
3701 Unit installed. Despite seperating a section in cooling
Box to be used as freezer
, the holding plate did not generate freezing temperature. Temperature remained at -1,6˚ celsius.
Iíve now pulled the RED ASU unit and looked at the dipswitch settings. I did find an explenation of dipswitch settings in another tread here, but assume this was for the BLUE ASU version as i didnít recognize the explenation.
I have now changed the dipswitch in position 3, resulting in compressor
working, now at -7,7˚ and still lowering temp. Control unit in manual position at the lowest setting.
Q: Did i find the dipswitch changing the Unit from a fridge to a freezer
Q2: Is there a risk of the holding plate liquid to expand and burst the holding plate. Currently monitoring the situation with hope that the liquid will not be completely frozen in the lowest setting.
Q3: Anyone in hold of an explenation or manual describing the dipswitch settings for this RED Isotherm