Cruisers Forum

Join CruisersForum Today

  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on Cruisers Forums. Advertise Here
Thread Tools Search this Thread Rate Thread Display Modes
Old 27-07-2019, 17:34   #1
Registered User

Join Date: Mar 2019
Posts: 1
Best way to seal a gap in a tweaked fridge door

I have a two drawer Vitrifrigo fridge freezer. The upper freezer drawer appears to be a little tweeked on bottom left side. Itís not a drawer slide alignment issue. It looks as if the molded plastic on the drawer itself is deformed just enough to create a gap at the corner edge for a few inches. I replaced the seals. Didnít work. I put some weather seal foam tape on the gap at first. Didnít work because there was still a little gap where the tape stopped and the seal continued. I put weather strip dense, firm foam tape around the entire drawer and it worked a little. I still have lots of condensation on outside of fridge and tons inside. Everything in the lower fridge drawer gets soaked. Anyone have any solutions? I appreciate any tips. Thanks!
Ryan11 is offline   Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Vitrifrigo door seal / gasket replacement Singleprop Plumbing Systems and Fixtures 9 15-07-2019 16:28
Need new door seal for custom refer door autumnbreeze27 Plumbing Systems and Fixtures 3 24-08-2014 14:09
Swinging Door vs Sliding Door delmarrey Construction, Maintenance & Refit 8 08-04-2012 18:19
Best Way to Seal Hull / Keel Joint ? OrangeCrush Construction, Maintenance & Refit 7 24-03-2010 08:28
ISO Fridge Door Hardware Geoff S. Construction, Maintenance & Refit 3 28-06-2006 11:37

Advertise Here

All times are GMT -7. The time now is 23:44.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2020, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.