Before I re install my 4-108, I want to replace my shaft packing. My associate says it's easy and that changing the shaft packing out while the boats in the
water is easy, and we won't sink the
boat.
I have visions of my
boat on the bottom, because of some unforeseen complication."
Gents, what say you. My options are R&R the shaft
thru hull packing in the
water, or wait put the boat
on the hard, replace the packing then set the
motor.
If I pull the boat, I have five days free, thought I would do the bottom in that five day period.
33 ft boat , is this a realistic time table with two people
sanding.
Dirk
Linear Mode
Recent Discussions