Hi, I have a Cs36T and had to do some work
on the strut. There was a slight play from side to side and I was having a small leak from there. I could of sealed the leak with 3m 5200, but because there was a play, I wanted to fix it properly. In order to do so, I removed the muffler
and grinded my way to the strut from the inside. It's molded in the hump just below the fuel tank
. I didn't see any screws or bolts there? Once I grinded enough material around the strut, I poured some epoxy
and I used a vacuum cleaner from the outside to pull some epoxy
thru. After it cured, I applied a bead of 3m 5200 on the outside and filled the void with thickened epoxy Hope this helps?
Sent from my iPhone
using Cruisers Sailing Forum