|
21-09-2020, 22:45
|
#1
|
Registered User
Join Date: Apr 2020
Posts: 9
|
Broadblue 385 Sliding Door
Hi - the sliding door on our Broadblue 385 has progressively got harded to slide, close and lock. It now will not close at all.
We noticed that several large ball berrings are lodged behind the glass at floor level. We have tried to lift the door out without success. We have also been unable to dislodge the fallen ball berrings.
I have tried looking in the owners manual for advice on how to remove and fix the door but could't find anything.
Has anyone else had and solved this problem?
Tks
BB
|
|
|
22-09-2020, 08:44
|
#2
|
Registered User
Join Date: Feb 2020
Location: Boston Massachusetts, USA
Boat: Broadblue 385
Posts: 7
|
Re: Broadblue 385 Sliding Door
We have noticed more force is needed to close the sliding door, but for us still considering a reasonable amount of force. So perhaps we will get to your state in a near future. I wll take a look at our door later this week to see if I can spot anything. Sorry this is not helping you much.
BTW, our 385 is 2006 model.
|
|
|
22-09-2020, 09:03
|
#3
|
Moderator
Join Date: Feb 2012
Location: Carrabelle, Florida
Boat: Fiberglas shattering 44' steel trawler
Posts: 6,083
|
Re: Broadblue 385 Sliding Door
Brave Bear, could you post some pictures? There's something wrong in there (those ball bearing were supposed to be doing something), and it's not going to be rocket science to fix, but without photgraphs it's hard to make suggestions.
__________________
Never let anything mechanical know that you are in a hurry.
|
|
|
22-09-2020, 14:44
|
#4
|
Registered User
Join Date: Apr 2020
Posts: 9
|
Re: Broadblue 385 Sliding Door
Quote:
Originally Posted by SvFree
We have noticed more force is needed to close the sliding door, but for us still considering a reasonable amount of force. So perhaps we will get to your state in a near future. I wll take a look at our door later this week to see if I can spot anything. Sorry this is not helping you much.
BTW, our 385 is 2006 model.
|
Tks SvFree - ours is a 2008 model. As with most sliding doors, i think the trick is working out how to remove the door to do maintenance and then successfully get it back in place.
|
|
|
22-09-2020, 16:09
|
#5
|
Registered User
Join Date: Apr 2020
Posts: 9
|
Re: Broadblue 385 Sliding Door
Tks tkeithlu
See attached. Might be hard to see but ballberrings have fallen to bottom of glass and impact sliding. Cannot get them out without removing the door. Think we have to dismantle the top pelmet somehow.
Kind regards
BB
|
|
|
23-09-2020, 08:15
|
#6
|
Registered User
Join Date: Jul 2019
Posts: 96
|
Re: Broadblue 385 Sliding Door
Following as I am planning to order a BB346 next year which also has a sliding door. Have you contacted Mark Jarvis at Broadblue (broadblue@hotmail.co.uk) for advice?
|
|
|
23-09-2020, 09:04
|
#7
|
Registered User
Join Date: Sep 2010
Location: Oregon City, OR
Boat: 37 Uniflite Coastal Cruiser
Posts: 799
|
Re: Broadblue 385 Sliding Door
No experience with these, but some experience with the sliding glass doors in Uniflites. Those turn out to be not dissimilar to patio sliding glass doors. That is to say that they adjust with cams that allow the doors to be raised and lowered in their tracks. They are removed by lowering the adjustments, and raising the doors until they swing out of the lower track. In the case of the Uniflite installations, a trim piece at the top and bottom must be removed to allow the door panels to be removed.
|
|
|
23-09-2020, 10:58
|
#8
|
Registered User
Join Date: May 2009
Posts: 26
|
Re: Broadblue 385 Sliding Door
All the windows & doors on BB 385's were supplied by Seaglaze 24 Wendover Rd , Norwich NR13 6LH UK tel 01603 720745 sales@seaglaze.co.uk ,,They are really helpful with all enquiries . all windows & doors have a pt no etched into the glass & it helps to quote this when you talk with them ,,,Good Luck
|
|
|
23-09-2020, 12:26
|
#9
|
Registered User
Join Date: Feb 2015
Boat: Lagoon 410
Posts: 11
|
Re: Broadblue 385 Sliding Door
I have a Logoon 410 that I had to remove the sliding door. I'm not on the boat at this time to see how I did this. The two guides at the top of the door had to be released to allow me to raise the door high enough to clear the bottom track. The bottom of the door could then be pulled aft, allowing the top to be removed from the top track. It took me a while to figure out how to release the top guides.
Yours may not be the same be it's worth a try.
|
|
|
23-09-2020, 18:26
|
#10
|
Registered User
Join Date: Apr 2020
Posts: 9
|
Re: Broadblue 385 Sliding Door
Quote:
Originally Posted by Ifitsworthdoing
Following as I am planning to order a BB346 next year which also has a sliding door. Have you contacted Mark Jarvis at Broadblue (broadblue@hotmail.co.uk) for advice?
|
Tks ifitsworthdojng, i have sent an email to Mark st BB. He provided some good advice when we were buying. Kind regards. BB
|
|
|
23-09-2020, 18:29
|
#11
|
Registered User
Join Date: Apr 2020
Posts: 9
|
Re: Broadblue 385 Sliding Door
Quote:
Originally Posted by Dooglas
No experience with these, but some experience with the sliding glass doors in Uniflites. Those turn out to be not dissimilar to patio sliding glass doors. That is to say that they adjust with cams that allow the doors to be raised and lowered in their tracks. They are removed by lowering the adjustments, and raising the doors until they swing out of the lower track. In the case of the Uniflite installations, a trim piece at the top and bottom must be removed to allow the door panels to be removed.
|
Tks Dooglas - we are giving this a go now. All the bedt. BB
|
|
|
23-09-2020, 18:33
|
#12
|
Registered User
Join Date: Apr 2020
Posts: 9
|
Re: Broadblue 385 Sliding Door
Quote:
Originally Posted by Paul Carey
All the windows & doors on BB 385's were supplied by Seaglaze 24 Wendover Rd , Norwich NR13 6LH UK tel 01603 720745 sales@seaglaze.co.uk ,,They are really helpful with all enquiries . all windows & doors have a pt no etched into the glass & it helps to quote this when you talk with them ,,,Good Luck
|
Tks Paul - this is helpful. We will contact the supplier with a hope of getting diagramatic installation instructions. All the bedt. BB
|
|
|
23-09-2020, 18:43
|
#13
|
Registered User
Join Date: Apr 2020
Posts: 9
|
Re: Broadblue 385 Sliding Door
Quote:
Originally Posted by lagoon410
I have a Logoon 410 that I had to remove the sliding door. I'm not on the boat at this time to see how I did this. The two guides at the top of the door had to be released to allow me to raise the door high enough to clear the bottom track. The bottom of the door could then be pulled aft, allowing the top to be removed from the top track. It took me a while to figure out how to release the top guides.
Yours may not be the same be it's worth a try.
|
Tks Lagoon410, we are giving this a go now. Kind regards BB
|
|
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Rate This Thread |
Linear Mode
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
Advertise Here
Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
Vendor Spotlight |
|
|
|