Bristol Yachts

Did you sell these sails? Any chance they are still available? On Saturday, September 3, 2022 at 7:15

Exotic Psyche Phamarceuticals Our mission is to improve safety through harm reduction. The vast

ENJOY OUR SECRET SERVICE ON TELEGRAM NOW 1; Clone cards What is clone cards it is simply a bank card

https://www.dellaria.org/cousins/max-massimo-dellaria-senior/?fbclid=

Here it is, the annual Make a Wish Foundation fundraiser. 100% of your donations are made directly to

All, how is that bulkhead fastened in place? Have you worked/repaired one? I'm wondering what it

Spoke to my mechanic Said its a Hurth /ZF. On Sep 6, 2022, at 10:52 AM, dcneuro dcneuro.net <

I recently purchased a 1985 Bristol 41.1 that had been repowered in 2016 with a Beta Marine 50. The

I bought a replacement cowl on ebay. Do a search and you'll likely find some sources. On Aug 12,

If your steering system is from Edson, take a look at their technical help on their website: https://

Ricardo , I wonder if I could come by and admire your '19? I've never really seen one up

Previous owner installed the same windlass and we have been extremely happy with it. A custom piece

Attached is a photo of my windlass. It is a maxwell horizontal electric windlass. It replaced a

To be honest I've only rowed once or twice. Relying on the 2 hp Honda. Although I did winch it up

Thanks David! I'm going to heed your advice and pull them and see if I can get some help

I have a 60s era 29. And I love this vessel doing some interior work she's mechanically sound and

Thank you!!! I looked at them again and I considered this. I can't find anyone to make them or

I have to agree with a larger cold plate being much more efficient. This summer I had the opportunity

Two documents for replacing fixed ports. 1. Portlight replacement – some additional comments The

David, I've successfully regreased a 1" seacock while the boat was in the water. Use a foam

FYI, this is exactly how my 40 is set up too. On Apr 11, 2021, at 10:42 PM, Mike L <ml460j@gmail.

HAHA found it right before i launched. engine water intake hiding behind the Groco On Mon, Jan 25,

I was faced with the same decision. I opted for the Bristol 40 w/ Keel. I love the boat. Has wheel

I use 7/16 sta-X braid works fine. I would trust all rope over wire rope since wire fatigues.. Check

If this helps: Calculating the number of BTUs needed to heat an area In terms of heating and cooling

A Google search turned up a variety of suppliers including Schaeffer Marine. https://hardware.

No, the compressor is very quiet, can barely hear it from the V-berth. On Friday, June 11, 2021 at 1:

They sound the same, screw head is recessed. Best of luck, Ken On Mon, Jun 21, 2021 at 5:32 PM 2016ma

What type of transmission do you have? I have a paragon A1D on my Westerbeke 4107 and it was slipping

i will be taking pictures of the boat very soon, we bought the bristol 1979 new,,,therefore one owner