SIMRAD GoFree Wifi

[timohara]

Hi All

Help please...

My SIMRAD GoFree Wifi has seems to have stopped working. The power light is on - but it is not broadcasting a SSID Wifi Hot Spot - and seems to not be acting as a router for the chart plotter and RI10 Radar Interface.

The chart plotter is connected - and there is no traffic between them - the LED lights are not flashing.

I want to reset the GoFree - but can not do that unless I can connect to it - and I can not connect to it without it broadcasting a SSID to connect to with my iPad.

Arrgghhh !

Any thoughts ?

Thanks

Tim

[smac999]

unplug the power cable for a min.

there may be a small reset button on it. not sure. most routers do.

[timohara]

Hi

Yep - tried the powering off for some time.
Yep - looked for a reset button - cant find one anywhere.

Thanks anyway.

[Neptune's Gear]

The reset button is under the round rubber bung by the other connectors.


Sent from my iPad using Cruisers Sailing Forum

[timohara]

Hi Matt

Arrrhhh Haaaa !!! Nice one.

Thanks Matt - I will try it tomorrow when I am back there.

Thanks again,

Tim