For Sale: Freya39 for sale in Thailand

[leiftre]

Freya39 For Sale


The Freya39 built by Gannon yachts, with her robust construction, her cutaway forefoot full keel and her uncluttered flush deck, all add up to an incredibly seaworthy and comfortable blue water cruiser. Her designer's roots in ocean racing ensured that she was also fast. Capable of 200+ mile days,and with the original freya famously winning the Sydney to Hobart race three years in a row.

Our Freya is in the late phases of her refurbishment. Most of the costly and dirty work has been completed. As she stands, she is cruise ready and needs primarily a headsail, and a some interior cosmetic work to bring her fully up to fighting shape.

She is outfitted with numerous spare parts including a complete spare monitor wind vane, an unused Profurl furling drum, and too many spare pumps, rigging, hardware etc. to list.

All items new as of 2017-

Electrical-
-New 300 Watts Solar: Mounted on solar arch and provides shade to the cockpit, while keeping panels free of shade.
-New Outback Flexmax80 mppt solar charge controller
-New 3 150 AH 12 volt AGM Batteries
-New 600 Watt inverter
-New Ray Marine Fathometer and Transducer
-New Raymarine Tiller Pilot (for use with wind pilot)



Galley-
New Isotherm Refrigeration

Ground Tackle-
-New Lofrans Tigress Electric Windlass
-Quickwindlass switch

Rigging-
New Sampson XLS Extra
Mainsail, Headsail,Staysail Halyards,and Sheets.
New Furling Line

Engine-
-New Jabsco water pump including: 3 spare impelars and rebuild kit
-New Bosch 120 amp alternator
-Three Raycor 500 fuel filters, with valves to isolate filters. Numerous spare filter cartridges
-R&D flexible shaft coupling


Head-
New shower sump pump and water lines

Bilge-
-Whale gusher diaphragm pump
-Ultra Pumpswitch

Extras
-9 ft paddle board and paddle
-Helios Hyperlon inflatable kayak
-Power tools including: Makita electric drill, Bosch electric drill, Bosch grinder, Bosch random orbiting sander, vibrating sander, Bosch circular saw, Maktek router trimmer, tap and die sets etc.

Work done- 2015-2017

-New teak toerail
-New topside paint
-Bottom stripped and faired, epoxy barrier coat applied. New bottom paint
-Prop shaft bearing, and stuffing box gland replaced
-80% of deck fittings removed, rebedded with sealant and remounted.
-All through hulls and valves replaced with Forspar Marelon fittings
Pre broker price - 48,000 usd
More pics wil be added shortly









Sent from my iPad

[leiftre]

Freya 39
SV.Haida


Model: Freya 39
Builder: Gannon Yachts
Type: Double ended cutter
Year Hull Built: 1978
Year Launched: 1995
Weight: 13 Gross Tons
Length: 39’
Beam: 11’
Draft: 5.9’
Location: Langkawi Malaysia

The Freya 39 built by Gannon Yachts, with her robust construction, her cutaway forfoot full keel, and her uncluttered flush deck, all add up to an incredibly seaworthy and comfortable blue water cruiser. Her designer’s roots in ocean racing ensured that she was also fast. Capable of 200+ mile days and with the original Freya famously winning the Sydney to Hobart race three years in a row.

Our Freya is in the late phases of her refurbishment. Most of the costly and dirty work has been completed. As she stands. she is cruise ready and primarily needs a headsail and some interior cosmetic work to bring her fully up to fighting shape.

She is outfitted with numerous spare parts including a complete spare monitor wind vane, an unused Profurl furling drum, and too many spare pumps, rigging, hardware etc. to list.



Electrical:

(All following items new as of 2017)
- New 300 Watts Solar: Mounted on solar arch and provides shade to the cockpit, while keeping panels free of shade.
- New Outback Flexmax80 mppt solar charge controller
- New 3 150 AH 12 volt AGM Batteries
- New 600 Watt inverter
- New Ray Marine Fathometer and Transducer
- New Raymarine Tiller Pilot (for use with wind pilot)

Ground Tackle:

- New 2017 Lofrans Tigress Electric Windlass
- Quickwindlass switch (new2017)
- 45lb Bruce attached to 280’ of 3/8 chain
Additional CQR, Danforth, and collapsable fisherman’s style anchor


Rigging and Sails:

-New Sampson XLS Extra
Mainsail, Headsail,Staysail Halyards,and Sheets.
-New Furling Line
-Unused spare Profurl Furling drum

Swaged standing rigging is in good condition. Last change unknown.
-Fully battened mainsail in good condition
-Roller furling headsail needs replacement
-Staysail and storm staysail. Both in good condition.


Engine:

Maranized 2012 Izusu 240
40HP
Aproxamatly 700 Hrs
-New2017 Jabsco water pump including: 3 spare impellers and rebuild kit
-New 2017 Bosch 120 amp alternator
-New 2017 Three Raycor 500 fuel filters, with valves to isolate filters. Numerous spare filter cartridges
-New 2017 R&D flexible shaft coupling
-Stainless 340lt fuel tank with access port.

Galley:

-New 2017 Isotherm air cooled refrideration.
-3 burner gimbled stove top and oven.
-Two stainless freshwater tanks totaling 300lt.
-Double basin stainless sink with pressure water



Head-

New 2017 shower sump pump and water lines
Lavac Head with spare pump.
Stainless sink and shower.

Bilge And Fittings:

-Whale gusher diaphragm pump (New 2017)
-Ultra Pump switch (New 2017)
-All through hulls and valves replaced with Forspar Marelon fittings (New2017)


Extras:

-9 ft paddle board and paddle(New 2017
-Helios Hyperlon inflatable kayak (New 2017)
-Power tools including: Makita electric drill, Bosch electric drill, Bosch grinder, Bosch random orbiting sander, vibrating sander, Bosch circular saw, Maktek router trimmer, tap and die sets etc.



Work done- 2015-2017

-New teak toerail
-New topside paint
-Bottom stripped and faired, epoxy barrier coat applied. New bottom paint
-Prop shaft bearing, and stuffing box gland replaced
-80% of deck fittings removed, rebedded with sealant and remounted.
-All through hulls and valves replaced with Forspar Marelon fittings

[RobTryon]

Price?

[leiftre]

$45,000 USD

Will repost with price.

[leiftre]

Freya 39
SV.Haida
$45,000 USD


Model: Freya 39
Builder: Gannon Yachts
Type: Double ended cutter
Year Hull Built: 1978
Year Launched: 1995
Weight: 13 Gross Tons
Length: 39’
Beam: 11’
Draft: 5.9’
Location: Langkawi Malaysia

The Freya 39 built by Gannon Yachts, with her robust construction, her cutaway forfoot full keel, and her uncluttered flush deck, all add up to an incredibly seaworthy and comfortable blue water cruiser. Her designer’s roots in ocean racing ensured that she was also fast. Capable of 200+ mile days and with the original Freya famously winning the Sydney to Hobart race three years in a row.

Our Freya is in the late phases of her refurbishment. Most of the costly and dirty work has been completed. As she stands. she is cruise ready and primarily needs a headsail and some interior cosmetic work to bring her fully up to fighting shape.

She is outfitted with numerous spare parts including a complete spare monitor wind vane, an unused Profurl furling drum, and too many spare pumps, rigging, hardware etc. to list.



Electrical:

(All following items new as of 2017)
- New 300 Watts Solar: Mounted on solar arch and provides shade to the cockpit, while keeping panels free of shade.
- New Outback Flexmax80 mppt solar charge controller
- New 3 150 AH 12 volt AGM Batteries
- New 600 Watt inverter
- New Ray Marine Fathometer and Transducer
- New Raymarine Tiller Pilot (for use with wind pilot)

Ground Tackle:

- New 2017 Lofrans Tigress Electric Windlass
- Quickwindlass switch (new2017)
- 45lb Bruce attached to 280’ of 3/8 chain
Additional CQR, Danforth, and collapsable fisherman’s style anchor


Rigging and Sails:

-New Sampson XLS Extra
Mainsail, Headsail,Staysail Halyards,and Sheets.
-New Furling Line
-Unused spare Profurl Furling drum

Swaged standing rigging is in good condition. Last change unknown.
-Fully battened mainsail in good condition
-Roller furling headsail needs replacement
-Staysail and storm staysail. Both in good condition.


Engine:

Maranized 2012 Izusu 240
40HP
Aproxamatly 700 Hrs
-New2017 Jabsco water pump including: 3 spare impellers and rebuild kit
-New 2017 Bosch 120 amp alternator
-New 2017 Three Raycor 500 fuel filters, with valves to isolate filters. Numerous spare filter cartridges
-New 2017 R&D flexible shaft coupling
-Stainless 340lt fuel tank with access port.

Galley:

-New 2017 Isotherm air cooled refrideration.
-3 burner gimbled stove top and oven.
-Two stainless freshwater tanks totaling 300lt.
-Double basin stainless sink with pressure water



Head-

New 2017 shower sump pump and water lines
Lavac Head with spare pump.
Stainless sink and shower.

Bilge And Fittings:

-Whale gusher diaphragm pump (New 2017)
-Ultra Pump switch (New 2017)
-All through hulls and valves replaced with Forspar Marelon fittings (New2017)


Extras:

-9 ft paddle board and paddle(New 2017
-Helios Hyperlon inflatable kayak (New 2017)
-Power tools including: Makita electric drill, Bosch electric drill, Bosch grinder, Bosch random orbiting sander, vibrating sander, Bosch circular saw, Maktek router trimmer, tap and die sets etc.



Work done- 2015-2017

-New teak toerail
-New topside paint
-Bottom stripped and faired, epoxy barrier coat applied. New bottom paint
-Prop shaft bearing, and stuffing box gland replaced
-80% of deck fittings removed, rebedded with sealant and remounted.
-All through hulls and valves replaced with Forspar Marelon fittings

[Geta]

Hi leiftre, just wondering if the boat is still for sale?

If so we'd love to see some more photos and get an idea of the interior layout.

Regards
Dan

[WindandCs]

Hey Guys,
Interested in "Haida". Are you still located in Malaysia? If so, then the timing isn't right for us. If you're in the states, then maybe it is Feel free to contact me at 434-987-5997
Peace ~ Curtis

[Jim Cate]

Capable of 200+ mile days,

While I do like the Freya design, this claim is a bit stretchy IMO, being that it requires AVERAGING well above her hull speed... and no one would claim that the Freya is a planing hull shape.

They do make a comfortable cruiser, and one that is surprisingly fast for her size and type.

Jim

[Paul L]

Originally Posted by Jim Cate

While I do like the Freya design, this claim is a bit stretchy IMO, being that it requires AVERAGING well above her hull speed... and no one would claim that the Freya is a planing hull shape.

They do make a comfortable cruiser, and one that is surprisingly fast for her size and type.

Jim

Don't be a skeptic. The 200 mile days include 2 kts of current.

[Jim Cate]

Originally Posted by Paul L

Don't be a skeptic. The 200 mile days include 2 kts of current.

So often true...

Jim

[WindandCs]

Actually Jim, the Freya's are capable of 200 mile days, and of course not planing hulls, but on the contrary very serious hull shapes for off shore work. In all three consecutive years the original Freya won the Sydney to Hobart race (the only boat to ever do so), her average speed was 8+knts. Basically 200 nautical mile days. Without a favorable current, but instead eddies that move and counter each other as one moves south. In addition, had the original Freya raced in later races, with that average speed, she would have won in years 2004, 2003, 1993, 1988, 1984, 1981, 1978, 1977, 1976, 1974, 1970, 1968, 1967, and 1966. She was a very impressive boat. I can't comment on what a GRP boat might sail like, but the original wooden one was a rocket ship, and seaworthy. This is an interesting article you might like. https://reiss.wordpress.com/2007/02/...lvorsen-story/

Cheers

[Jim Cate]

Originally Posted by WindandCs

Actually Jim, the Freya's are capable of 200 mile days, and of course not planing hulls, but on the contrary very serious hull shapes for off shore work. In all three consecutive years the original Freya won the Sydney to Hobart race (the only boat to ever do so), her average speed was 8+knts. Basically 200 nautical mile days. Without a favorable current, but instead eddies that move and counter each other as one moves south. In addition, had the original Freya raced in later races, with that average speed, she would have won in years 2004, 2003, 1993, 1988, 1984, 1981, 1978, 1977, 1976, 1974, 1970, 1968, 1967, and 1966. She was a very impressive boat. I can't comment on what a GRP boat might sail like, but the original wooden one was a rocket ship, and seaworthy. This is an interesting article you might like. https://reiss.wordpress.com/2007/02/...lvorsen-story/

Cheers

Well, there are eddies in the EAC, but I think that you are misinterpreting their influence on speeds over the ground on that route. I've done the trip from the Sydney area south to Tassie 16 times now, and have experienced favorable currents on all of them, often over two knots. There have been occasional, short lived contrary currents, and some periods of no perceptible current, but in every case there has been overall gain.

I'm sure t hat having a skilled and competitive racing crew in a race prepared boat vastly improves daily runs, especially when compared to a short handed cruising lot, but I'm far from convinced that even that well sailed and competitive Freya could average 200 mile days without the help of some current. That is not to say that they are slow for their size, for they do quite well, and have an excellent reputation for comfort at sea.

And FWIW, many years ago I did a single hand race against one, owned by Richard Spindler (the publisher/editor of Latitude 38) and he whipped my ass convincingly... but I was sailing a 30 footer, so I had an excuse!

I hope that you find a new home for your Freya, and the the new owners appreciate what a fine boat she is!

Jim

[iamsteve2u]

Hi,
Is your Freya 39 still for sale? If so please send me some more photos and any additional info that might help us decide whether it's the boat for us.
Thanks,
Steve

[leiftre]

Freya 39
SV. Haida
$32,000 USD

Model: Freya 39
Builder: Gannon Yachts
Type: Double ended cutter
Year Hull Built: 1978
Year Launched: 1995
Weight: 13 Gross Tons
Length: 39'
Beam: 11'
Draft: 5.9'
Location: Langkawi Malaysia

The Freya 39 built by Gannon Yachts, with her robust construction, her cutaway forefoot full keel, and her uncluttered flush deck, all add up to an incredibly seaworthy and comfortable blue water cruiser. Her designer's roots in ocean racing ensured that she was also fast. Capable of 200+ mile days and with the original Freya famously winning the Sydney to Hobart race three years in a row.

Our Freya is in the late phases of her refurbishment. Most of the costly and dirty work has been completed. As she stands, she is cruise ready and primarily needs a headsail and some interior cosmetic work to bring her fully up to fighting shape.

She is outfitted with numerous spare parts including a complete spare monitor wind vane, an unused Profurl furling drum, and too many spare pumps, rigging, hardware etc. to list.

Electrical:
(All following items new as of 2017)
- New 300 Watts Solar: Mounted on solar arch and provides shade to the cockpit, while keeping panels free of shade.
- New Outback Flexmax 80 mppt solar charge controller
- New 3 150 AH 12 volt AGM Batteries
- New 600 Watt inverter
- New Ray Marine Fathometer and Transducer
- New Raymarine Tiller Pilot (for use with wind pilot)

Ground Tackle:
- New 2017 Lofrans Tigress Electric Windlass
- Quick windlass switch (new 2017)
- 45lb Bruce attached to 280' of 3/8 chain
Additional CQR, Danforth, and collapsible fisherman's style anchor

Rigging and Sails:
-New Sampson XLS Extra
Mainsail, Headsail, Staysail Halyards, and Sheets.
-New Furling Line
-Unused spare Profurl Furling drum

Swaged standing rigging is in good condition. Last change unknown.
-Fully battened mainsail in good condition
-Roller furling headsail needs replacement
-Staysail and storm staysail. Both in good condition.

Engine:
Maranized 2012 Isuzu 240
40HP
Approximately 700 Hrs
-New 2017 Jabsco water pump including: 3 spare impellers and rebuild kit
-New 2017 Bosch 120 amp alternator
-New 2017 Three Raycor 500 fuel filters, with valves to isolate filters. Numerous spare filter cartridges
-New 2017 R&D flexible shaft coupling
-Stainless 340lt fuel tank with access port.

Galley:
-New 2017 Isotherm air cooled refrigeration.
-3 burner gimbled stove top and oven.
-Two stainless freshwater tanks totalling 300lt.
-Double basin stainless sink with pressure water

Head:
New 2017 shower sump pump and water lines
Lavac Head with spare pump.
Stainless sink and shower.

Bilge And Fittings:
-Whale gusher diaphragm pump (New 2017)
-Ultra Pump switch (New 2017)
-All through hulls and valves replaced with Forspar Marelon fittings (New2017)

Extras:
-Power tools including: Makita electric drill, Bosch electric drill, Bosch grinder, Bosch random orbiting sander, vibrating sander, Bosch circular saw, Maktek router trimmer, tap and die sets etc.

Work done- 2015-2017:
-New teak toerail
-New topside paint
-Bottom stripped and faired, epoxy barrier coat applied. New bottom paint
-Prop shaft bearing, and stuffing box gland replaced
-80% of deck fittings removed, rebedded with sealant and remounted.
-All through hulls and valves replaced with Forspar Marelon fittings

[Guiuan]

Hi leiftre - is haida still on the market? I live in the Philippines and am most interested on making an offer pending personal inspection etc. I assume that the web site allows you to respond via private email (private communication or some such) - could you please respond so that I can interface with you.
Ta very much
Gordon - aka Guiuan