reliable rigger in spain

[dwf]

Hello,

Our HR46 #183 2003 with in mast hydraulic furling and Cutter rig also all hydraulic is 16 years old and has its original rig. It has sailed only around 10 000 nautical miles mostly coastal. No Ocean crossing. The visual inspection by a rigger is OK. The rig is well tuned. I understood that to slack on the lee side can damage quickly even a new rig so age or miles is not a sufficient criteria.

Nevertheless I am thinking of replacing the standing rig.

I have all the dimensions by the Selden mast number etched at the base.

Is it better to have a Selden authorized agent do the job since he is familiar of the in mast furling. We are north of Barcelona in Spain. Has someone a good experience to share.

Best regards.

Thank you.

Denis

[gsuescum]

Near Barcelona in Badalona, I had a good experience with Carlos Paya. He re rigged our Privilege 615 on time and for a reasonable price. Contact info below. Don’t know if it will help but you could mention me, Guillermo Suescum, and remind him he did our P615 Luar about 3 years ago. Good luck!


Carlos Payá - Project & Product Manager
Email me carlospe@emvmarine.com
Call me (+34) 649 860 846

[dwf]

Thank you.

I am putting him on my list. It is always good to have customer feed back.

Regards

Denis