1996 Jeanneau Intl 50 Wiring issue

[SeeMonstrEd]

Hello, I have a 1996 Jeanneau International 50 with a Perkins M90 (4.236) engine. After replacing the raw water impeller my low oil pressure alarm is on all the time. I checked the pressure with a mechanical gauge an it is fine 60 psi.

I need a wiring diagram to help trace the wiring to make sure I don't just have a wiring problem. Does anyone have a wiring diagram for this engine and boat?
I have tried closing the circuit for the oil sensor and it is still on. Disconnecting the wires also does nothing.

None of the gauges have worked since I purchased the boat so a wiring diagram would help with correcting that also.

Thanks for any help.

Capt Ed

[chuckr]

Try here - a lot of Jeanneau owners who may be able to help
Home | Jeanneau Owners Forum