Cruisers & Sailing Forums - View Single Post

bobs · 18-07-2007, 22:16

suppose i supply a separate 3,5 volt to the haicom GPS receiver (this is approx. the usb volts) , which wire , TX or RX do i need to connect to the NMEA input of the chartplotter ?

Thanks again

18-07-2007, 22:16	#6
bobs Registered User Join Date: Jul 2007 Posts: 29	suppose i supply a separate 3,5 volt to the haicom GPS receiver (this is approx. the usb volts) , which wire , TX or RX do i need to connect to the NMEA input of the chartplotter ? Thanks again