[SkiprJohn]

I'm just getting ready to install slotted aluminum toerail on my Cascade. I will be using 5200 and then screwing and thru bolting every so often. Does anyone have a recommendation as to what interval one should put a screw or bolt through the toerail at the top of the hull?

The toerail is heavy aluminum that goes down the side 2 1/2 inches then curves over on the deck 1 1/2 inches. The slotted part continues vertically from the side portion above the deck.

I'll be calling Cascade too but thought I'd run it by the experts just to get your opinion. All opinions are requested.

Kind Regards,

JohnL