Quote:
|
Originally Posted by Chris31415 alohaboat
Could you let us know which brand and model of pump you are using? |
No, I'm sorry, I can't do that. I have a conflict of interest when it comes to this particular fuel polishing company. Since I was working in the marine industry before retiring, I received a lot of equipment free or at reduced prices in order to 'test' or perhaps promote their products. Such is the case with my fuel polishing system.
There are many good polishing systems out there. A simple phone call or email to any of them should get you loads of information to the point where you can build your own. Ask for a copy of their schematics. Yes they are relatively simple to build but I advise against using inexpensive automative pumps and equipment.
My system is well engineered, nicely finished, and gave lots of "wow" factor in the engine room when my boat was on the boat show circuit. I don't have stand up head room in my e.r. but I do have sit up room with benches all around the engine so there is plenty of room to work on and enjoy the beauty of everything related to the engine.