Cruisers & Sailing Forums - View Single Post

cat man do · 14-02-2007, 22:33

Fair enough Aloha and Wheel's on the fuel polishing bit, seem's to be the go, if I google fuel polishing I get heaps of stuff, but if I search OZ only I get no real answer's/response.

I had sort of allowed for a fuel polishing setup, which I was hoping could be as simple as a fuel transfer pump pumping through a couple of water seperator filters and back to the tank I sucked from.

All being on a manifold setup so I could open the apropriate ball valve to access the required tank.

This was the poor man's version costing hundred's of $$$

All the stuff I've seen in the US sites has many thousand's of $$$ attached to them.

could my thought's on a system work?

Any info or link's to the home made version of ?

Dave

14-02-2007, 22:33	#18
cat man do Registered User Join Date: Aug 2006 Location: Brisbane Australia [until the boats launched] Boat: 50ft powercat, light,long and low powered Posts: 2,251	Fair enough Aloha and Wheel's on the fuel polishing bit, seem's to be the go, if I google fuel polishing I get heaps of stuff, but if I search OZ only I get no real answer's/response. I had sort of allowed for a fuel polishing setup, which I was hoping could be as simple as a fuel transfer pump pumping through a couple of water seperator filters and back to the tank I sucked from. All being on a manifold setup so I could open the apropriate ball valve to access the required tank. This was the poor man's version costing hundred's of $$$ All the stuff I've seen in the US sites has many thousand's of $$$ attached to them. could my thought's on a system work? Any info or link's to the home made version of ? Dave __________________ "Money can't buy you happiness but it can buy you a yacht large enough to pull up right alongside it"...............David Lee Roth http://www.thecoastalpassage.com/ Last edited by cat man do; 14-02-2007 at 22:39.