Cruisers & Sailing Forums - View Single Post - Internal Bulkhead

**Boracay** · 14-02-2007, 19:18

I've found that straight 5:1 laminating resin is thin enough to penetrate well.
The problem is uneven penetration so a second coat would be necessary.
After a couple of coats of epoxy you can put anything you like ontop.

14-02-2007, 19:18	#4
Boracay Moderator Moderator Join Date: Feb 2004 Location: nr Blackwattle Bay,Sydney, NSW, Australia Boat: Steel Roberts Offshore 44 Posts: 1,880	Laminating resin should be thin enough... I've found that straight 5:1 laminating resin is thin enough to penetrate well. The problem is uneven penetration so a second coat would be necessary. After a couple of coats of epoxy you can put anything you like ontop. __________________ Rust never sleeps Boracay Blog.