|
David - I did a similar installation on an old powerboat in the v berth. Used a textured vinyl - cheap from the fabric store - came out fine - hints - use a good spreadable waterproof adheasive with notched trowel and roll out any bubbles to the edges. You might want to install small corner bead strips of 1/2" plastic molding to trim of the join around the edge of the bulkhead where it meets the hull and trim the cutout with outside corner mold to secure and hide the cut edges of the vinyl.
Regards,
__________________
Randy Benoit
I37CC 'Ta-Keel-Ah'
|