Cruisers & Sailing Forums - View Single Post

WindDancer · 23-07-2006, 15:24

Will be replacing the screw in zinc's(3) in my Yanmar 3GM30, should I use teflon tape or antiseize compound on the threads? It is salt water cooled.

TIA
Forrest

23-07-2006, 15:24	#1
WindDancer Registered User Join Date: Oct 2005 Location: Phoenix, AZ Boat: Lancer 36 at Mission Bay, San Diego Posts: 32	Teflon tape or antiseize? Will be replacing the screw in zinc's(3) in my Yanmar 3GM30, should I use teflon tape or antiseize compound on the threads? It is salt water cooled. TIA Forrest