Quote:
Originally Posted by highseas  Like the Milltech ad says;"Give your PC the power to see shipping traffic".Doesn't say give your C80 the power to see.I tried every combination,nothing worked on C80,settled for laptop use only for now.Mostly just want to see ships offshore anyway,for now thats it for me.Sounds like most people who actually get both working are using the Brookhouse. |
MUX NOT required for simple AIS hookup unless you want to multiplex AIS & GPS or boat data on same NMEA input. I use NMEA input exclusively for AIS & bring in other data on Seatalk using NMEA/Seatalk adaptor.
Assuming you have software upgrade (latest v 4.29) on C80 that supports AIS, set input to: AIS 38400 baud & connect +ve output on AIS rx to white lead on C80 NMEA lead & -ve to green. It will work!
Regards