Quote:
Originally Posted by CatsPaw  I've stripped off the DSC connection and set the Raymarine to 38000 baud - what else do I need to do to make the C80 recognize the NASA AIS?
I don't see why I would still need the Brookehouse mux in this case |
You don't. MUX is only needed to combine separate NMEA sources (NOT as reported earlier in this thread). I have three individual devices hanging off one AIS rx & working perfectly, similarly with GPS.
Re C80 hook up, check connection polarity, ensure your AIS rx is receiving ship data & that AIS layer on C80 is turned on. You can also check AIS NMEA stream by looking at rx buffer (Menu/System Diagnostics/External Devices/NMEA).
Regards