Cruisers & Sailing Forums - View Single Post - Internal Bulkhead

donradcliffe · 12-07-2009, 10:32

The vinyl will look smoother and better if you use the foam backed stuff. You can create trim for the corners by cutting strips which follow the curves, then folding over and stitching both sides, then glue on.

12-07-2009, 10:32	#12
donradcliffe Registered User Join Date: Mar 2007 Location: Santa Cruz for summer Boat: Beneteau First 456 Posts: 650	The vinyl will look smoother and better if you use the foam backed stuff. You can create trim for the corners by cutting strips which follow the curves, then folding over and stitching both sides, then glue on.