Gord, Charlie
Thanks again for all the info. Yes I see my gen/set is to small to run the charger at max performance. Charlie: I did a quick search for the 50 MFD that is listed in the tech page from xantrex and the only one I found that was close was a 50 MFD 370 VOLT run capacitor. The tech note specified a 50 MFD/270 Vac which I assume the 270 vac means 270 volts a.c. If I remember correctly my genset is only 120 volt ac.
50 MFD, 370 Volt, "Run" Capacitor (2-Pack)
Is this the right one? Also it says to connect it between the hot and neutral wires which means across the line side wires at the genset?
I will try that for a temp fix but I think I may be better off putting a 100-200 amp high output alternater on the genset and charge the bank that way like I said eairler I will be doubling my house bank before I go and I would like to keep my charging time to around two hours a day using around 150 amp hrs a day.
Captden