Cruisers & Sailing Forums - View Single Post

wolfenzee · 30-06-2009, 20:11

In an earlier thread I mentioned I was biulding an ice box and asked about insulation....people were very helpful there. Ice box I am building will be able to use block ice and thermoelectric or cold plate.....I am upgrading my electrical system to 2 deep cycle marine and 1 8D for cabin power and two deep cycle marine for dedicated engine, this should be able to handle a fridge. I don't want to (and can't afford) a pre-made fridge. I am making my own ice box, top loading, about 3cf...if that. How do I make a cold plate fridge.

30-06-2009, 20:11	#1
wolfenzee Registered User Join Date: Feb 2008 Location: Port Townsend, WA (NW corner of Puget Sound) Boat: 30' William Atkin design "Captian Cicero"' - S/V ROVER Posts: 149	Cold Plate / Thermoelectric? In an earlier thread I mentioned I was biulding an ice box and asked about insulation....people were very helpful there. Ice box I am building will be able to use block ice and thermoelectric or cold plate.....I am upgrading my electrical system to 2 deep cycle marine and 1 8D for cabin power and two deep cycle marine for dedicated engine, this should be able to handle a fridge. I don't want to (and can't afford) a pre-made fridge. I am making my own ice box, top loading, about 3cf...if that. How do I make a cold plate fridge.