Quote:
Originally Posted by donradcliffe  Is that the one with the 5 screws and one is longer than the rest, so you put it on first, then slide the ring through the hole and put in the other 4 screws?? | Install the first screw thtrough the threaded flange and the interior mounting adapter, before twisting the adapter into the tank. Then “fiddle” the remaining screws into place, then tighten.
➥ SHS Holding Tank Sender Installation Drawing by WEMA USA, Inc.
There are also folding backing rings, like these
➥ Seabuilt - Access Plate Systems
__________________
Gord May
~~_/)_~~ (Gord & Maggie - "Southbound")
"If you didn't have time/$ to do it right in the first place, when will you get the time/$ to fix it?" |