Cruisers & Sailing Forums - View Single Post - Identify this Exhaust Elbow? (Match or Fabricate Replacement)

Rex Delay · 26-06-2009, 09:52

About 5 years ago I made one very similar using stock galvanized plumbing fittings and brazed on a bronze nipple for the water injector - still going strong and it cost about $20.

26-06-2009, 09:52	#6
Rex Delay Registered User Join Date: Oct 2006 Location: Banff, AB; Nanaimo, BC Boat: Sceptre 36 Posts: 50	About 5 years ago I made one very similar using stock galvanized plumbing fittings and brazed on a bronze nipple for the water injector - still going strong and it cost about $20.