|
Schoonerdog,
If you go the Debond route also pick up a set of the plastic wedges to help. The last time I checked, their website was a bit screwed up when it came time to buy. I think I ended up just calling them. While on their website take a look at the demo videos.
Neither myself or my friends have used the product on hatches but we have used it on windows and portlights. My neighbor removed his silicone windows on a Sabre 28 in about 10 min per window. You first score the sealant/caulk with a blade, spray, wait about 5 min, apply a little upward pressure with the wedges and spray one more time. After about 5-10 min more they should pry off without too much work.
As to the Dremel version of the Fein tool, I looked at them but they weigh just a fraction of the weight of the Multimaster. I figured that they'd be OK for a small job but not for the kind of intense labor that I use the tool for. Also, along the same lines, I see that Sears is now selling their version. I've not had an opportunity to physically see one yet.
Rich
|