Cruisers & Sailing Forums - View Single Post

wolfenzee · 06-11-2008, 17:14

It turns out that my stove is a Dickinson Berring, The only way I could load wood into it would be from the top (not feasible on a boat) or from the back or side if I converted it to a pellet stove. I am exploring the possiblity of converting to a pellet stove, but I can't find plans to convert/build a pellet and the way our economy is geared all the information I can find is where to *buy* a new stove. If I could get the guts to a pellet stove it would be a fairly easy conversion.

06-11-2008, 17:14	#31
wolfenzee Registered User Join Date: Feb 2008 Location: Port Townsend, WA (NW corner of Puget Sound) Boat: 30' William Atkin design "Captian Cicero"' - S/V ROVER Posts: 149	another wrinkle ...... pellet stove It turns out that my stove is a Dickinson Berring, The only way I could load wood into it would be from the top (not feasible on a boat) or from the back or side if I converted it to a pellet stove. I am exploring the possiblity of converting to a pellet stove, but I can't find plans to convert/build a pellet and the way our economy is geared all the information I can find is where to buy a new stove. If I could get the guts to a pellet stove it would be a fairly easy conversion.