|
My prodder attaches behind the trampoline to a spinnaker pole bayonet on a universal joint; it stands over the forward crossbeam and is held up by screecher halyard tension. While I am currently using fixed waterstays (whiskerstays) which mean a fixed position for my screecher tack, I am considering bringing the whisker stays back inside the prodder to allow me to shift the tack laterally. I will need a small winch to do do so and maintain halyard tension. A present fear is that the proximity of the furled screecher is fouling the airflow on the genoa, The boat points a bit higher when the screecher is down. It may improve tacking the screecher, a royal PITA.
My prodder is a 3" carbon shaft, 9 feet long. The whole assembly can be pulled in to reduce my LOA 3 feet, by slacking the halyard and releasing the bayonet. Pole, furler, lines and mount weigh 26 pounds. The sail weighs 64 pounds.
|