Cruisers & Sailing Forums (http://www.cruisersforum.com/forums/)
-   Marine Electronics (http://www.cruisersforum.com/forums/f13/)
-   -   Autohelm 1000 analogue (http://www.cruisersforum.com/forums/f13/autohelm-1000-analogue-9294.html)

Oistein 23-07-2007 14:15

Autohelm 1000 analogue
 
Trying to disassemble a dead AH1000. (Old, but has worked until lately
- probabel fault is cable or internal cable connection).

It seems that the switch and the magnetic wheel needs to be removed first for a clean disassembly.

Anyone knows how?

webster 20-10-2008 11:27

Quote:

Originally Posted by Oistein (Post 92590)
Trying to disassemble a dead AH1000. (Old, but has worked until lately
- probabel fault is cable or internal cable connection).

It seems that the switch and the magnetic wheel needs to be removed first for a clean disassembly.

Anyone knows how?


the center of the switch knob lifts out (knife tip) revealing a circular nut. Spin it off with an awl tip then lift the switch knob. The wheel knob lifts off after removing the compass rose plate and the slot screw.

The 6 body screws can be spun out by using awl tips too. I subsequently cut a slot in each screw for future convenience...

Do you still have the unit? I'm looking for a functioning circuit board....

GordMay 21-10-2008 02:39

Autohelm 1000 ANALOGUE
Installation and Operating Handbook

http://www.raymarine.com/SubmittedFi...0_analogue.pdf

Raymarine “Retired” Autopilot Manuals:
Raymarine Marine Electronics - Retired Autopilot Manuals


All times are GMT -7. The time now is 04:19.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2019, vBulletin Solutions, Inc.


ShowCase vBulletin Plugins by Drive Thru Online, Inc.