Cruisers & Sailing Forums (http://www.cruisersforum.com/forums/)
-   Electrical: Batteries, Generators & Solar (http://www.cruisersforum.com/forums/f14/)
-   -   Master Volt battman pro wiring. (http://www.cruisersforum.com/forums/f14/master-volt-battman-pro-wiring-214569.html)

timtam 26-02-2019 19:37

Master Volt battman pro wiring.
 
2 Attachment(s)
Hi,

I've purchased a mastervolt battman pro to upgrade my battery voltage meter.

Looking at the wiring diagram that came with it, I can understand most of it but I'm a little unsure where to put the negative shunt.

I've added a picture of the boats current wiring and the diagram that comes with the battman pro.

Should I put it between the house and start battery then run a cable from the shunt to the solenoid? Or can I just put it between the house battery and the solenoid?

Thanks.

Attachment 186711Attachment 186712

smac999 26-02-2019 19:58

Re: Master Volt battman pro wiring.
 
take the 2 neg wires off the house battery. attache both to one side of shunt. make new short cable from house battery to shunt.


All times are GMT -7. The time now is 05:24.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2019, vBulletin Solutions, Inc.


ShowCase vBulletin Plugins by Drive Thru Online, Inc.