Cruisers & Sailing Forums (http://www.cruisersforum.com/forums/)
-   OpenCPN (http://www.cruisersforum.com/forums/f134/)
-   -   br24radar-pi_pot (http://www.cruisersforum.com/forums/f134/br24radar-pi_pot-161025.html)

Gilletarom 11-02-2016 14:48

br24radar-pi_pot
 
Hello All,

I'm busy complete the translation of the language file of this plugin. I have a question to ask but what thread?

So here it is:
There are two items that contain the word "Zeroconf". These are the items
- ZeroConf via Ethernet,
- ZeroConf E'net;

That means these items? Zeroconf that mean?

Best regards. Gilletarom.

ve7mdl 11-02-2016 22:23

Re: br24radar-pi_pot
 
Bonjour Gilletarom,

I take it to mean that you do not need to do any configuration on the interface. No need to assign an IP address or routing since the radar uses a broadcast IP address, which should be picked up by any interface.

There is also an IETF group working on ZeroConf. This may be where the term came from.

Cheers, ....Erik.
Home

merrimac 13-02-2016 02:23

Re: br24radar-pi_pot
 
Zero Configuration Ethernet. What's not to like -- it means we don't care what the IP address etc is.

If you can't think of a word just replace the entire sentence with the french word for "Ethernet."

The entire sentence is just used as display information. An older version of the dialog is shown in the documentation:

http://opencpn.org/ocpn/sites/defaul..._11_status.png


All times are GMT -7. The time now is 18:18.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2019, vBulletin Solutions, Inc.


ShowCase vBulletin Plugins by Drive Thru Online, Inc.