Cruisers & Sailing Forums (http://www.cruisersforum.com/forums/)
-   Marine Electronics (http://www.cruisersforum.com/forums/f13/)
-   -   New NSS8 Display - Old Standard Horizon Transducers (http://www.cruisersforum.com/forums/f13/new-nss8-display-old-standard-horizon-transducers-149002.html)

ronrelyea 05-07-2015 10:35

New NSS8 Display - Old Standard Horizon Transducers
 
Has anyone had success using a depth transducer from an old Standard Horizon Depth Instrument with a Simrad Multifunction Display (MFD) ? I've got a new NSS8 mfd. Old Std Horizon DS-10 transducer. The transducer has only a two connector RCA plug ... wondering if I can use it with the Simrad.

Follow on question .... if that old transducer will not work ... does anyone know if a new Simrad transducer is the same diameter and fitting type as the old Std Horizon transducers? If I need a new transducer, it would be nice if I could use the same thru-hull without pulling the boat out of the water to install a new thru-hull.

Thanks!


All times are GMT -7. The time now is 01:42.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.


ShowCase vBulletin Plugins by Drive Thru Online, Inc.