Cruisers & Sailing Forums (
-   Classifieds Archive (
-   -   For Sale: Snatch Blocks (

woodguy 11-07-2014 12:05

Snatch Blocks
3 Attachment(s)
Two new, never used. SS with 3" aluminum sheaves. Soft, nonmar cheeks. Have cam locks, trunions and swivels. Approx. weight 38oz each. $225 each plus shipping. Located near Chicago, IL. Other sailing equipment available. Call John at 815 568-1776.

Badsanta 12-07-2014 08:35

Re: Snatch Blocks
Do you have a link to your other items?

woodguy 12-07-2014 09:19

Re: Snatch Blocks
I'm not very computer capable. I can tell you I have a LOT of stuff from a boat build in the 1980s (Southern Cross 32') that never got completed. I have:
Complete set of 12 stanchions, wire, gates, fittings, etc.from White Water Marine. I have a Shipmate SS cabin heater complete, never out of the box. I have 10 SS cleats, 4 Enkes winches with 4 handles, bronze haws pipes, 16 Merriman SS turnbuckles & toggles, a SS bow roller, a complete main sheet system with track, blocks, stops, car, etc. Various SS halyard blocks, Patay SD450 bilge pump, a bunch of SS Castlock wire terminals, a bronze thru hull, a bunch of RC Marine fiberglass thru hulls, an Oberdorfer bronze 12v macerator pump, bronze keel bolts, misc. SS cabinet fittings, anti-siphon valve for engine exhaust and various misc bits and pieces. All this stuff is new, never used. I can post pics if your interested and send you info on sizes, etc. where applicable. Let me know what your interested in and maybe we can settle on a price. I'm willing to be quite reasonable.

Badsanta 12-07-2014 10:14

Re: Snatch Blocks
Intrested in gates, cleats and macerator.

Badsanta 12-07-2014 10:15

Re: Snatch Blocks
Shipmate and bow roller.

woodguy 12-07-2014 14:41

Re: Heater and bow roller
5 Attachment(s)
Here are some pics of the heater. Alas, the manual is missing. I'm guessing at some point I took it out to examine and never put it back. As I recall there was also a separate pressure tank with a pump and gage. That too has gone missing.There are fittings on the top of the heater to attach these as well. Sorry. Make me an offer if you're still interested.
The gates are integral to the lifeline set which I'm only selling as a unit.
Send me another reply and I'll attach pics for the rest of the stuff you're interested in.

woodguy 12-07-2014 15:30

Re: pump, cleats & bow roller
6 Attachment(s)
Attached are pics of the bow roller. SS with delrin sheaves. It's about 13 to 14 inches long and articulated. Never used. $75.
Also the Oberdorfer bronze, 12v, macerator pump. Scratches on top are from being moved around in a box with other things over the years. Never used. $325 seems reasonable since they're going on the 'Net' for $425 to $566 for the same model.
Also the cleats - 4 are 10" long w/ backing plates & 6 are 8" long, no plates. All are open base SS. 4 hole, heavy duty. Never used. 10" - $25ea, 8" - $20ea. I'd like to sell them as a set if possible.
Shipping is extra. You pay return freight if not satisfied and I'll give you a full refund of your purchase price. Let's use Paypal. Let me know if your interested and/or want more pics.
Here are the pics:

Scott Berg 12-07-2014 18:29

Re: Snatch Blocks
Very interested in the heater

Sent from my iPhone using Cruisers Sailing Forum

Jubilee39 12-07-2014 18:44

Re: Snatch Blocks
What sizes are the enkes?

woodguy 12-07-2014 18:57

Re: Snatch Blocks
Good. Make me an offer.

woodguy 12-07-2014 20:20

Re: Enkes winches
I have two #18, one #12 and one #8 all new never used.

Badsanta 12-07-2014 23:05

Re: Snatch Blocks
I'll take the bow roller. Thanks

Badsanta 13-07-2014 10:11

Re: Snatch Blocks
Pm also sent check

Badsanta 14-07-2014 07:13

Re: Snatch Blocks
PLEASE check your mail.

woodguy 14-07-2014 15:19

Re: Snatch Blocks
1 Attachment(s)
The shipping for the bow roller is $13.70 with $50 insurance or $15.70 with $75 insurance. According to what I've been told by Paypal you can send them the $ using my email address to identify my account; I could send you an invoice if I had your email address. I've never done this before but that's what they said. So it's $75 plus one of the two options above. I will need a shipping address.
Good news. I found the pump and pressure gage for the Shipmate heater. They were in another box so as not to get damaged. The seal on the pump piston has dried out and needs to be replaced but otherwise they appear to be in good working order. See pic. (The other hole is for the vent pipe.) Make an offer if you're still interested.

All times are GMT -7. The time now is 18:46.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2019, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.