| External Link Notice |
Page Information:
|
Page Title:
Monohull Sailboat Design
Page Description:
Contrary to the use of symmetrical twin keels as popularized by Westerly, my design utilized asymmetrical foil keels which were placed at a 3 degree angle to the fore/aft centerline of the vessel. The asymmetrical foil shape was more efficient per square foot of keel area at developing the leeway reducing forces, thus the total wetted surface area could be reduced.
This Page is About:
mast-aft sailing rig, monohull design, asymmetrical foil keel
|
|
NOTICE: By following the "Continue to External Link" above you will be leaving Cruisers & Sailing Forums web site and entering a web site hosted by another party. Cruisers & Sailing Forums does not have any responsibility for, or control over, any of these sites, their content or their privacy policies. We do not endorse or make any representations about them, or any information, products, or materials found there, or any results that may be obtained from using them. If you decide to access any of the linked third parties, you do so entirely at your own risk.
|
|
All times are GMT -7. The time now is 20:00.
