| External Link Notice |
Page Information:
|
Page Title:
1969 Chris Craft Roamer 46 Refit: Fitting a Veneer Panel For the Galley Bulkhead « 1969chriscraftroamer46
Page Description:
The missus came out to help on the project. I armed her with a pile of sticks and a glue gun coming up to temp while I started pulling sheets of 1/8" mahogany plywood out of the stack. Then we got busy finishing up the big panel work that has to happen before I can…
This Page is About:
|
|
NOTICE: By following the "Continue to External Link" above you will be leaving Cruisers & Sailing Forums web site and entering a web site hosted by another party. Cruisers & Sailing Forums does not have any responsibility for, or control over, any of these sites, their content or their privacy policies. We do not endorse or make any representations about them, or any information, products, or materials found there, or any results that may be obtained from using them. If you decide to access any of the linked third parties, you do so entirely at your own risk.
|
|
All times are GMT -7. The time now is 23:10.
