| External Link Notice |
Page Information:
|
Page Title:
1969 Chris Craft Roamer 46 Refit: Prepping the Aft Head for Paint « 1969chriscraftroamer46
Page Description:
The aft head ceiling panels are installed, so the next step involves sanding everything down, final fairing, and priming. We'll let the 545 cure overnight, then hit it with 320 grit before taping everything off and spraying the eggshell Awlgrip shiny. Next up in our 1969 Chris Craft Roamer 46 Refit: Spraying "the Shiny" in…
This Page is About:
|
|
NOTICE: By following the "Continue to External Link" above you will be leaving Cruisers & Sailing Forums web site and entering a web site hosted by another party. Cruisers & Sailing Forums does not have any responsibility for, or control over, any of these sites, their content or their privacy policies. We do not endorse or make any representations about them, or any information, products, or materials found there, or any results that may be obtained from using them. If you decide to access any of the linked third parties, you do so entirely at your own risk.
|
|
All times are GMT -7. The time now is 00:17.
