Cruisers Forum
 

External Link Notice

Page Information:

Page Title:
Brion Toss Yacht Riggers, Sailboat Rigging::Books

Page Description:
This website is an outgrowth of both rigging and teaching; in the following pages you'll find field-proven tools and ideas -- powerful and elegant enough for a professional, but easy for the dedicated amateur to understand and use.

This Page is About:
sailboat, rigging, sailboat rigging, sta-loks, sta-locks, traditional rigging, norseman, wire, splicing, wire splicing, tree care, arborists, consulting, tools, videos, classes, standing rigging, running rigging, rope, rope splicing, ropework, fancy ropework, knots, rig, rig design, survey, tuning, maintenance, jury rigging, masts, sails, tangs, terminals, braided rope, double braid, lazy jacks, sheets, halyard, blocks, wand, splicing wand, fid, phid, Pt. Hudson Phid, aloft, chainplate, compression loads, seizing, service, fairleads, fair leads, righting moment, lashings, backstay, forestay, apprentice, shrouds, rigging vise, vise, Sta-loks, Sta-Loks, Sta-Locks, spar, sail, boat

NOTICE: By following the "Continue to External Link" above you will be leaving Cruisers & Sailing Forums web site and entering a web site hosted by another party. Cruisers & Sailing Forums does not have any responsibility for, or control over, any of these sites, their content or their privacy policies. We do not endorse or make any representations about them, or any information, products, or materials found there, or any results that may be obtained from using them. If you decide to access any of the linked third parties, you do so entirely at your own risk.

Other Discussions You Might Enjoy
Thread Thread Starter Forum Replies Last Post
Rigging instructions for the standing rigging of the 321 Oceanis anadale1 Deck hardware: Rigging, Sails & Hoisting 0 20-06-2011 15:52
Re: Rigging, Compression Fittings for Standing Rigging Maineiac_sailor Deck hardware: Rigging, Sails & Hoisting 2 26-01-2011 07:30
Synthetic standing rigging roblanford Deck hardware: Rigging, Sails & Hoisting 33 31-12-2008 20:11
Standing Rigging Bill Balme Construction, Maintenance & Refit 8 25-11-2005 04:37
Standing Rigging Pa La O La Multihull Sailboats 6 28-07-2005 12:50



All times are GMT -7. The time now is 09:08.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.