| External Link Notice |
Page Information:
|
Page Title:
1969 Chris Craft Roamer 46 Refit: Exhaust II « 1969chriscraftroamer46
Page Description:
After working out the method on the port exhaust flange, making the second one was much quicker on the starboard side. Hull is ready for the flange. First, cut circles of 1810 biaxial I'm using four layers of 1810 biaxial for the flange. Since the Centek exhaust components appear to be no thicker than one…
This Page is About:
|
|
NOTICE: By following the "Continue to External Link" above you will be leaving Cruisers & Sailing Forums web site and entering a web site hosted by another party. Cruisers & Sailing Forums does not have any responsibility for, or control over, any of these sites, their content or their privacy policies. We do not endorse or make any representations about them, or any information, products, or materials found there, or any results that may be obtained from using them. If you decide to access any of the linked third parties, you do so entirely at your own risk.
|
|
All times are GMT -7. The time now is 07:40.
