| External Link Notice |
Page Information:
|
Page Title:
Manual Ball Valve | TRUDESIGN
Page Description:
Light weight Ball Valve, free from corrosion and electrolysis - TruDesign Certified Ball Valves are designed and made in New Zealand for use in marine applications above and below the water line.
The body of the Ball Valve is manufactured in glass-reinforced nylon composite with high impact and tensile strength resulting in a light weight unit, free from corrosion and electrolysis issues. The ball and sealing rings utilize a PTFE polymer to ensure a smooth action, and continuous ease of operation over many years. The Ball Valve is available in both BSP and NPS Parallel thread forms and can be locked in the closed position for use on toilet waste outlets.
This Page is About:
|
|
NOTICE: By following the "Continue to External Link" above you will be leaving Cruisers & Sailing Forums web site and entering a web site hosted by another party. Cruisers & Sailing Forums does not have any responsibility for, or control over, any of these sites, their content or their privacy policies. We do not endorse or make any representations about them, or any information, products, or materials found there, or any results that may be obtained from using them. If you decide to access any of the linked third parties, you do so entirely at your own risk.
|
|
All times are GMT -7. The time now is 09:27.
