Cruisers Forum
 


Conversation Between DameGravey and AndyEss
Showing Profile Comments 1 to 1 of 1
  1. AndyEss
    Graeme - I am still interested but I have a bit of a problem - length. My boat is a bit new to me, the "as built" drawings are incorrect, so I don't have a good measurement on the distance between the tip of my bowsprit and the spinnaker halyard block. As best I can figure, it's 50 ft (15.2 m) +/-.
    What is the extreme length on your assembly (connection point to connection point)? Shortening it as you note shouldn't be a problem, and having a asym clearing my bowsprit rails would be an advantage, I believe, but I'm not sure adding a short extension below the assembly would be the best solution. I've never flown an asym or even regular spinnaker so I am a little blind here. I won't be back on my boat until two weeks at the earliest, it's nearly the entire continent across from me right now.
    Andy


All times are GMT -7. The time now is 22:51.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.