Cruisers Forum
 


Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on Cruisers Forums. Advertise Here
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 09-07-2009, 07:58   #1
Registered User
 
JusDreaming's Avatar

Join Date: Jul 2004
Location: Stuart, FL & Bahamas Cruising
Boat: Lagoon 37
Posts: 880
Images: 13
Wind : Tide Ratio

I was told once about the amount of wind it required to counteract a knot of current/tide. But I am suffering CRS and can not remember the numbers. Does anyone know these ratios?
__________________
Denny and Diane
Lagoon 37
https://www.svjusdreaming.bravehost.com/
https://www.sailblogs.com/member/svjusdreaming/
"The only way to get a good crew is to marry one." -Eric Hiscock
JusDreaming is offline   Reply With Quote
Old 09-07-2009, 08:36   #2
Registered User

Join Date: Dec 2006
Location: Seattle
Boat: Cal 40 (sold). Still have a Hobie 20
Posts: 2,945
Images: 7
I'm not sure what you're asking. Is it how much wind it takes to just break even sailing against current? If so, I don't see how there could be a single answer, every boat requires a different amount of wind to achieve a certain speed.


John
cal40john is offline   Reply With Quote
Old 09-07-2009, 09:30   #3
Registered User
 
JusDreaming's Avatar

Join Date: Jul 2004
Location: Stuart, FL & Bahamas Cruising
Boat: Lagoon 37
Posts: 880
Images: 13
Quote:
Originally Posted by cal40john View Post
I'm not sure what you're asking. Is it how much wind it takes to just break even sailing against current? If so, I don't see how there could be a single answer, every boat requires a different amount of wind to achieve a certain speed.


John
I am certainly aware of the zillion factors that effect the boats movement, size of boat, windage, etc etc. But the numbers I was looking for me was a general rule.
An example would be: the wind is pushing me away from a dock, while the tide is pushing me towards the dock. So how much wind does it take to nullify the tidal effect?
The person who gave these numbers said he learned the numbers while being a helmsman in the CG
__________________
Denny and Diane
Lagoon 37
https://www.svjusdreaming.bravehost.com/
https://www.sailblogs.com/member/svjusdreaming/
"The only way to get a good crew is to marry one." -Eric Hiscock
JusDreaming is offline   Reply With Quote
Old 09-07-2009, 09:36   #4
Eternal Member
 
imagine2frolic's Avatar

Join Date: Feb 2008
Location: Las Brisas Panama AGAIN!
Boat: Simpson, Catamaran, 46ft. IMAGINE
Posts: 4,507
Images: 123
I would think that depended on windage, and hull, or hulls. I can't imagine there being a formula without having a HUGE variable?........i2f
__________________
SAILING is not always a slick magazine cover!
BORROWED..No single one of is as smart as all of us!
https://sailingwithcancer.blogspot.com/
imagine2frolic is offline   Reply With Quote
Old 09-07-2009, 09:40   #5
Registered User
 
GeoPowers's Avatar

Join Date: Dec 2008
Location: Gulfport, MS
Boat: Beneteau 393
Posts: 954
Images: 27
A very general rule of thumb...

15 kts wind : 1 kt current

...was what we went by in the Navy (destroyers).
GeoPowers is offline   Reply With Quote
Old 09-07-2009, 09:42   #6
Registered User
 
Hydra's Avatar

Join Date: May 2009
Location: Lorient, Brittany, France
Boat: Gib'Sea 302, 30' - Hydra
Posts: 1,245
For rough estimates, the French Navy teaches that one knot of current or tide is equivalent to about 30 knots of wind for warships. Of course, the exact ratio for a boat depends on the hull shape and top hamper, and also on the directions of wind and current. IME, for a sailing boat, the ratio would be closer to one knot of current to 20 knots of wind.

Alain
Hydra is offline   Reply With Quote
Old 09-07-2009, 11:10   #7
Senior Cruiser
 
GordMay's Avatar

Cruisers Forum Supporter

Join Date: Mar 2003
Location: Thunder Bay, Ontario - 48-29N x 89-20W
Boat: (Cruiser Living On Dirt)
Posts: 49,448
Images: 241
Fluid* dynamics can get pretty complicated, and though I don’t know how, the forces (kinetic energy content) could certainly be resolved mathematically.

*Wind is moving air & currents are moving water - both are fluids, though air is compressible & water is not. The energy content of a moving fluid varies as the square of it's velocity - so we appear (to me) to be shooting at a moving target. I think the ratio will be different at differing base-line velocities.

The equation would have to include the relative densities (854:1) of water (±1025 kilogram per cubic metre) & air (±1.2 kg/m3), the effective projected areas (above & below water), the square of their respective velocities, some factor for compressibility/not ...

Where’s all of our scientists, mathemeticians, & engineers?
__________________
Gord May
"If you didn't have the time or money to do it right in the first place, when will you get the time/$ to fix it?"



GordMay is offline   Reply With Quote
Old 09-07-2009, 11:38   #8
Registered User

Join Date: Dec 2006
Location: Seattle
Boat: Cal 40 (sold). Still have a Hobie 20
Posts: 2,945
Images: 7
Quote:
Originally Posted by GordMay View Post
Fluid* dynamics can get pretty complicated, and though I don’t know how, the forces (kinetic energy content) could certainly be resolved mathematically.

*Wind is moving air & currents are moving water - both are fluids, though air is compressible & water is not. The energy content of a moving fluid varies as the square of it's velocity - so we appear (to me) to be shooting at a moving target. I think the ratio will be different at differing base-line velocities.

The equation would have to include the relative densities (854:1) of water (±1025 kilogram per cubic metre) & air (±1.2 kg/m3), the effective projected areas (above & below water), the square of their respective velocities, some factor for compressibility/not ...

Where’s all of our scientists, mathemeticians, & engineers?
You're also going to need the co-efficient of drag for each.

John
cal40john is offline   Reply With Quote
Old 09-07-2009, 12:52   #9
Senior Cruiser
 
GordMay's Avatar

Cruisers Forum Supporter

Join Date: Mar 2003
Location: Thunder Bay, Ontario - 48-29N x 89-20W
Boat: (Cruiser Living On Dirt)
Posts: 49,448
Images: 241
John:
The co-efficient of drag for each may be accounted for in EFFECTIVE projected area, but if not, I refer you to " ... "
As I indicated, I don't really know, and call on someone with a better understanding of fluid dynamics.
__________________
Gord May
"If you didn't have the time or money to do it right in the first place, when will you get the time/$ to fix it?"



GordMay is offline   Reply With Quote
Old 09-07-2009, 13:52   #10
Moderator Emeritus
 
Pblais's Avatar

Join Date: Mar 2003
Location: Hayes, VA
Boat: Gozzard 36
Posts: 8,700
Images: 15
Send a message via Skype™ to Pblais
Gord, I think you have it and it and pretty much rules rules of thumb. Military ships sort of fall into a similar category based on the basics so it works for them pretty well. Recreational boats being lighter mass have more variations.

A beach ball floating on the water vs a 10 knot breeze and 6 knot current can have almost any current you can imagine and be blown where the wind goes. In the extreme example comes the answer. It all depends on how much of the above and below the water is exposed vs the mass of the boat. Submarines are not effected by the wind.

Newtonian physics says Force = Mass X Acceleration In this case we subtract the drag for each effective fluid as noted.
__________________
Paul Blais
s/v Bright Eyes Gozzard 36
37 15.7 N 76 28.9 W
Pblais is offline   Reply With Quote
Old 09-07-2009, 15:40   #11
Long Range Cruiser
 
MarkJ's Avatar

Join Date: Dec 2007
Location: Australian living on "Sea Life" currently in England.
Boat: Beneteau 393 "Sea Life"
Posts: 12,822
Images: 25
Well a fat old full keeler will lie to the current a hell of a lot longer than a Bene 393; but any Cat will already have swung ages ago.
__________________
Notes on a Circumnavigation.
OurLifeAtSea.com

Somalia Pirates and our Convoy
MarkJ is offline   Reply With Quote
Old 09-07-2009, 17:56   #12
Registered User
 
JusDreaming's Avatar

Join Date: Jul 2004
Location: Stuart, FL & Bahamas Cruising
Boat: Lagoon 37
Posts: 880
Images: 13
Quote:
Originally Posted by GeoPowers View Post
15 kts wind : 1 kt current

...was what we went by in the Navy (destroyers).
that is the one he quoted, as he was on a CG cutter
__________________
Denny and Diane
Lagoon 37
https://www.svjusdreaming.bravehost.com/
https://www.sailblogs.com/member/svjusdreaming/
"The only way to get a good crew is to marry one." -Eric Hiscock
JusDreaming is offline   Reply With Quote
Old 10-07-2009, 13:43   #13
Registered User
 
Hydra's Avatar

Join Date: May 2009
Location: Lorient, Brittany, France
Boat: Gib'Sea 302, 30' - Hydra
Posts: 1,245
Quote:
Originally Posted by GordMay View Post
Where’s all of our scientists, mathemeticians, & engineers?
Gord, I'm here .
In my first post, I wanted to keep away of technicalities but you seem to be interested in them. Then, I have tried hard to write a post explaining this subject with more detail but it is too much work for today. I give up for tonight and I go to bed.

Alain
Hydra is offline   Reply With Quote
Old 10-07-2009, 14:09   #14
Registered User
 
Captain Bill's Avatar

Join Date: Apr 2008
Location: Punta Gorda, Fl
Boat: Endeavourcat Sailcat 44
Posts: 3,177
Gordmay, If I remember correctly from my pilot training compressibility effects can be ignored up to speeds of about 200 MPH, or at least airspeed indicators don't have to be corrected for it until you exceed that speed. I would guess that we're talking about speeds less than that here.
Captain Bill is online now   Reply With Quote
Old 10-07-2009, 15:18   #15
Senior Cruiser
 
GordMay's Avatar

Cruisers Forum Supporter

Join Date: Mar 2003
Location: Thunder Bay, Ontario - 48-29N x 89-20W
Boat: (Cruiser Living On Dirt)
Posts: 49,448
Images: 241
Thanks Alain & Bill.
If 1 Kt current = 15 Kts wind
What 2 Kts current = ?
Remembering that force varies as velocity squared.
__________________
Gord May
"If you didn't have the time or money to do it right in the first place, when will you get the time/$ to fix it?"



GordMay is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Capsize Ratio Scott k General Sailing Forum 30 14-03-2013 06:05
Best combination of Prop to Gear Ratio & Engine ribbony Propellers & Drive Systems 25 17-01-2009 11:28
Horsepower / weight ratio Boris NZ Engines and Propulsion Systems 13 16-04-2008 17:56
Winch Quality/Price Ratio Intentional Drifter Deck hardware: Rigging, Sails & Hoisting 6 19-11-2007 19:26
Capsize ratio lancercr Monohull Sailboats 37 08-02-2007 06:42

Advertise Here


All times are GMT -7. The time now is 14:31.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.