Thanks for the welcomes. Especially the link to the
Gemini Catamarans group. Specifically what I was looking for in this case relates to how the hulls of the gemini are bonded to the fly bridge. I had my Gemini hauled for bottom
work and the yard noted a crack running horizontal on both hulls where the bridge
deck joins the
hull. I instructed them to lightly grind the area and have a look see. What they found at the joint was chalking in a seam covered with
bottom paint and slightly below the
fiberglass were screw/bolt heads. All this is below the
water line. I thought this was a bit unusual. I wondered if anyone has had similar experience or has information relating to the topic.
BTW The
boat name is Cool Obsession (named after the previous owners favorite
race horse) She is an 1997 Gemini 105m