Cruisers Forum
 


Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on Cruisers Forums. Advertise Here
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 12-11-2010, 11:58   #1
Registered User

Join Date: Nov 2010
Location: Blaine, WA
Boat: Monk 36 Chai Yen
Posts: 19
Greetings From the PNW and Chai Yen

Folks this is my first post. Mary and I have been sailing and cruising since the mid sixties starting in Hawaii with a Sunfish moving to a Sampson c-Mist "Quetzal" in the early seventies ( Bangkok to Manila ) - Bristol 40 "Impunity"1991 to 2005 and a Monk 36 trawler "Chai Yen" since the later two in the Pacific Northwest. I am a Coast Guard AUX rated Coxswain and hold a 50 ton nearcostal ticket with sail and tow ratings. I have pretty much covered the PNW from Olympia to Prince Rupert, the Queen Charlotes and both sides of Vancouver Island. This fall we were 27 days in the south sound and an additional 5 days in the San Juan Islands.

I would love to chat with fellow cruisers in the PNW area.
John_Greenough is offline   Reply With Quote
Old 20-11-2010, 03:20   #2
Registered User
 
James S's Avatar

Cruisers Forum Supporter

Join Date: May 2008
Location: We're technically refugees from our home in Yemen now living in Lebenon
Boat: 1978 CT48
Posts: 5,964
Images: 139
Welcome aboard John...plenty of PNW sailors around.
__________________
James
S/V Arctic Lady
I love my boat, I can't afford not to!
James S is offline   Reply With Quote
Old 20-11-2010, 04:40   #3
Registered User
 
Herbseesmoore's Avatar

Join Date: Apr 2008
Location: Silver Creek, WA, US
Boat: searching
Posts: 215
Images: 10
Hi John and welcome. We are wintering over in Bremerton having spent the fall doing the same, south sound and the SJ's. We started with our purchase in Blaine. Heading north to Ak next summer. Will look for you when we cast off next time. Come for a visit if you like. We motored so much on the flat water of the Puget Sound, we wondered if the trawler may have been better.
__________________
"When the world was flat as a pancake, Mona Lisa was happy as a clam" J. Prine
Herbseesmoore is offline   Reply With Quote
Old 20-11-2010, 16:35   #4
Registered User

Join Date: Nov 2010
Location: Blaine, WA
Boat: Monk 36 Chai Yen
Posts: 19
Folks, Since the last post I have spent 6 days in the San Juans - weathered a windy Sunday night and dined well on my son, Tom's, cooking. We are spending the winter getting the boat spiffed up for the spring and summer cruising season. 3/4th of the list is not done. Any recomendations for a quick change plate for a jabsco water pump">raw water pump? I managed to get my redone but the location and small bronze screws are in need of an upgrade. Sugestions please on how to address this issue.
John_Greenough is offline   Reply With Quote
Old 20-11-2010, 17:08   #5
Registered User

Join Date: Jan 2010
Location: Port Ludlow Wa
Boat: Makela,Ingrid38,Idora
Posts: 2,050
greets and salutations glad to see another PNW sailor on the forum.

Todd
IdoraKeeper is offline   Reply With Quote
Old 20-11-2010, 23:07   #6
Registered User
 
delmarrey's Avatar

Join Date: Mar 2003
Location: Philippines in the winters
Boat: It’s in French Polynesia now
Posts: 11,368
Images: 122
Welcome aboard John!

There are plenty of locals to get Jabsco pumps/parts around the Sound. What's the situation and what pump (mod. #) do you have? Or pictures?
__________________
Faithful are the Wounds of a Friend, but the Kisses of the Enemy are Deceitful! ........
The measure of a man is how he navigates to a proper shore in the midst of a storm!
delmarrey is offline   Reply With Quote
Old 20-11-2010, 23:25   #7
C.L.O.D
 
SaucySailoress's Avatar

Cruisers Forum Supporter

Join Date: Apr 2010
Posts: 8,232
Don't think I'm in the PNW area (can't be sure, cos I don't know what the PNW area is!! Pacific North West - there ya go, all I had to do was think about it. Time to go for a rest now, phew!

Welcome, sounds like you've had a fab time - and I'll see you there in a year or so!
SaucySailoress is offline   Reply With Quote
Old 22-11-2010, 08:14   #8
Registered User

Join Date: Nov 2010
Location: Blaine, WA
Boat: Monk 36 Chai Yen
Posts: 19
Delmarrey, My Jabsco is the 2.5 inch impeller and I am seriously thinking of getting the sureseal cover for this in order to easily remove the cap and pull the impeler. I note from other posts that sureseal may have a slightly dark side but..... On the perlins 6.354-4M the position of the pump is easy of access and I am only trying to speed up a change and avoid 6 deformed bronze screws. My take on the sureseal thread is that over tightening the thumb screw was the origin of the problems emcountered.

Comments please.
John_Greenough is offline   Reply With Quote
Old 22-11-2010, 11:43   #9
Registered User
 
delmarrey's Avatar

Join Date: Mar 2003
Location: Philippines in the winters
Boat: It’s in French Polynesia now
Posts: 11,368
Images: 122
Are you talking about a raw water pump or a propeller shaft. Sureseal is for prop shaft seals. Jabsco pumps usually have only 4 screws.
__________________
Faithful are the Wounds of a Friend, but the Kisses of the Enemy are Deceitful! ........
The measure of a man is how he navigates to a proper shore in the midst of a storm!
delmarrey is offline   Reply With Quote
Old 22-11-2010, 13:11   #10
Registered User
 
Arch Stanton's Avatar

Join Date: Mar 2008
Location: Olympia, WA
Boat: San Juan 28
Posts: 214
Hello from Olympia!

I'm planning a trip to the Queen Charlottes and Ketchikan next year and would love to pick your brain about it some time!
Arch Stanton is offline   Reply With Quote
Old 22-11-2010, 13:48   #11
Registered User

Join Date: Nov 2010
Location: Blaine, WA
Boat: Monk 36 Chai Yen
Posts: 19
Correction I mis-spoke but really I am not a politician! I really meant a SPEEDSEAL to be installed on a Jabsco raw Water pump which does have 6 bronze screws at least there two more than the fingers on my left hand not counting the thumb. Please excuse the confusion it is 23 Degrees out today!
John_Greenough is offline   Reply With Quote
Old 22-11-2010, 16:42   #12
Registered User
 
delmarrey's Avatar

Join Date: Mar 2003
Location: Philippines in the winters
Boat: It’s in French Polynesia now
Posts: 11,368
Images: 122
Quote:
Originally Posted by John_Greenough View Post
Correction I mis-spoke but really I am not a politician! I really meant a SPEEDSEAL to be installed on a Jabsco raw Water pump which does have 6 bronze screws at least there two more than the fingers on my left hand not counting the thumb. Please excuse the confusion it is 23 Degrees out today!
Good! I just wanted to make sure we were on the same page. I'll start a new thread called Speedseal? (link below) so your introduction doesn't get hijacked with tech info.

Yeah! It's 24º F here and snowing.

http://www.cruisersforum.com/forums/...tml#post564511
__________________
Faithful are the Wounds of a Friend, but the Kisses of the Enemy are Deceitful! ........
The measure of a man is how he navigates to a proper shore in the midst of a storm!
delmarrey is offline   Reply With Quote
Old 29-11-2010, 11:04   #13
Registered User
 
SkiprJohn's Avatar

Join Date: May 2006
Location: Nicholasville, Kentucky
Boat: 15 foot Canoe
Posts: 14,191
Aloha and welcome aboard!
Good to have you here and your experience will be very helpful if you're willing to share.
kind regards,
__________________
John
SkiprJohn is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Travels in the PNW delmarrey General Sailing Forum 45 26-07-2010 22:34
Currently in the PNW bilgewater Meets & Greets 7 19-02-2009 20:24
Hello from the PNW escapeartist Meets & Greets 2 12-10-2008 13:02
May in PNW Charlie Pacific & South China Sea 10 26-11-2006 19:30
Heading to the PNW jim lee General Sailing Forum 1 08-11-2005 16:37

Advertise Here


All times are GMT -7. The time now is 10:47.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.