Cruisers Forum

Join CruisersForum Today

Thread Tools Rate Thread Display Modes
Old 31-07-2006, 19:25   #1
Registered User
2brosana55ftr's Avatar

Join Date: Jul 2006
Location: Trying to figure out where the sail goes!
Boat: 45' C-Breeze Mess!
Posts: 11
Lightbulb 2bros, 2yrs building and 3yrs around the world!

Hi everyone,

My brother and I are embarking on our next adventure and wanted to introduce ourselves to the forum. [Last one was a 8 day Land Rover race across the Australian Outback and before that a 2800 mile trek through Mexico and Belize] We've just acquired a 55' yatch that has never seen water nor is it complete, it was FREE. The story behind it is that a man was building it in Tampa Bay and passed away in a car accident leaving it untouched in the boat yard where he was working on it some 20 years ago. It's been sitting since and while it hasn't rotted it's in pretty bad shape [photos to come.] It seems like a good long-term project in our opinion. We have a past of taking on insurmountable tasks! He has more experience sailing than I as I have none, I'm the Land Rover I'm looking forward to learning as I go.

Basically right now we are in the planning phase and will be for the next 1-3 months. Our vision for the project is to have it sea worthy in 24-36 months to depart from the corporate world we all know to sail around the world for 2-3 years. We are both extreamly resourcefull and capable individuals. We also have all the tools/basic skills to finish the boat. Engine mechanics, carpentry, electrical, technology, sanding/refinishing, ETC. Our goal is to do as much of the work ourselves as possible contracting out only the things 110% required. We are going to try and source as many items second hand and refinish when required. Basically we want to take our time, build it ourselves and spend as little as possibly. I'll throw a few questions out there to get irons in the fire for now. This will be an ongoing thread and we plan on putting up a simple webpage dedicated to the build as well.

- What would we expect to spend finishing the ship? The hull is done made of feralite fiberglass [needs sanded and coated], basic interior is trimmed out [very basic], mast mounting hardware is complete, likage from desk to below is complete for rudder, plumbing needs re-evaluated as does electrical, appliances and interior bits are non-existant and a few other things. Basically it's a shell that needs the inside, top side and outside finished. Simple right!

- Does anyone know what feralite is? It's supposedly a form of fiberglass but I can't seem to find anything else. Boat building materials seem to follow trends so maybe someone is familiar..

- Where are good sources for used parts or relatively inexpensive parts that we are going to need along the way of the build process? Aside from the obvious craigslist or eBay any specialized places that people normally use when building..

- Any suggestions for us? Books to pickup, sites to visit or people to contact?

Thanks in advance everyone!

Kind regards,
We are sailors in a small boat on a big ocean, and for the moment - nothing else matters.
2brosana55ftr is offline   Reply With Quote

round the world

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Our Communities

Our communities encompass many different hobbies and interests, but each one is built on friendly, intelligent membership.

» More about our Communities

Automotive Communities

Our Automotive communities encompass many different makes and models. From U.S. domestics to European Saloons.

» More about our Automotive Communities

Marine Communities

Our Marine websites focus on Cruising and Sailing Vessels, including forums and the largest cruising Wiki project on the web today.

» More about our Marine Communities

Copyright 2002-2015 Social Knowledge, LLC All Rights Reserved.

All times are GMT -7. The time now is 20:45.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2016, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.