Member Map Go to the Home Page Portal Cruisers & Sailing Forum Cruisers & Sailing Photo Gallery Manage Your Profile! Member Directory Search past discussions! Frequently Asked Questions Community Policies & Posting Rules Register Today, Its FREE!

Go Back   Cruisers & Sailing Forums > Scuttlebutt > Destinations > Great Lakes






Reply
 
Thread Tools Rate Thread Display Modes
Old 30-06-2008, 05:41   #1
gettinthere
Registered User
 
Join Date: Oct 2007
Posts: 81
lower Detroit River

Suggestions on what channel to take in the lower river. The Livingston channel looks a bit tight if you were to get passed by a freighter. Am I being overly cautious?
gettinthere is offline   Reply With Quote
Old 30-06-2008, 08:32   #2
courageous cat
Registered User
 
courageous cat's Avatar
 
Join Date: Mar 2008
Location: michigan 42-44.6n 83-28.8w
Boat: g-cat 5m
Posts: 21
hello, I could not begin to tell you witch way to go but hopefully this would help others with your question.
Google Maps
__________________
"well,blow me down" popeye
courageous cat is offline   Reply With Quote
Old 30-06-2008, 09:43   #3
Paul Ouellette
Registered User
 
Paul Ouellette's Avatar
 
Join Date: May 2004
Location: Windsor Ontario
Posts: 72
Gettinthere :

Are you asking about coming up river (to Lake St Clair) or down river (from Lake St Clair to Lake Erie) ?

I've been making that trip for too many years !!
__________________
Cheers, Paul.
www.winpipe.ca
Paul Ouellette is offline   Reply With Quote
Old 01-07-2008, 04:15   #4
Joli
Registered User
 
Join Date: Nov 2005
Location: Ohio
Posts: 1,145
Images: 6
Like Paul said, up or down? The LC is a downbound channel. It's a little tight but not bad when next to a freighter.
Joli is offline   Reply With Quote
Old 01-07-2008, 05:03   #5
gettinthere
Registered User
 
Join Date: Oct 2007
Posts: 81
Both ways. I'll be heading down to Lake Erie and then returning to Lake St Clair.

I'm familiar with the direction of each channel & have run them in a small power boat. But that ran at 35k and could easily outrun any freighter coming from behind. At 5 or 6k, I'll easily be overtaken by freighters.

Maybe I should put up my sails so I have right of way!!!
gettinthere is offline   Reply With Quote
Old 01-07-2008, 07:35   #6
Paul Ouellette
Registered User
 
Paul Ouellette's Avatar
 
Join Date: May 2004
Location: Windsor Ontario
Posts: 72
Gettinthere :

OK..here's what to do...

First of all, keep in mind you have a current running that's between 2-3 knots right along side Amhurstburg...yes, the current in the rest of the river is not quite that fast, but right there it narrows a bit & so the water moves a bit faster...

Anyway, when you're heading down-bound just follow the Livingston channel (we call it "the tube") out to Lake Erie like the freighters do. I've been passed by freighters in there many times & you'll have no problem.

Having said that, be sure to look ahead of your boat & behind your boat to see what sort of traffic there is (or isn't) coming into the channel as you're about to enter.

Hopefully seeing that you will have a clear shot through "the tube" will put your mind at ease...or if not, you'll have time to get out of the way in the unlikely event you may have an up-bound & down-bound freighter at the same time...that's never happenned to us & we've been running the river for many years.

The fact that you'll be assisted by the current, will have most sailboats moving close to 8-9 knots over ground...so even if you have a freighter off in the distance, you should be just fine to go though without them overtaking you.

Up-bound is a different situation (also due to the current) & so the thing to do is to keep close to Amhurstburg & NOT go through "the tube" so that you can stay out of the way of the faster boat traffic & freighters.

Once you're past Amhurstburg, I reccommend you stay to the American side to proceed up-river as it's a much wider channel & quite well marked.

In both up-bound & down-bound situations, I'd also strongly advise that you be sure to travel in daylight...as there's often "stuff" in the river (logs, tires, bodies, etc...) that are also making the trip out to Lake Erie, & so it's always a good idea to be able to see "things" to avoid hitting them & having a costly repair...or damaging the evidence.
__________________
Cheers, Paul.
www.winpipe.ca
Paul Ouellette is offline   Reply With Quote
Old 10-07-2008, 05:09   #7
gettinthere
Registered User
 
Join Date: Oct 2007
Posts: 81
Using the Livingston & Amherstberg channels was uneventful.
Passed by one freighter in the Livingston, plenty of room. On the way back north we never saw one freighter on the move on the river; July 8.

Thanks all.
gettinthere is offline   Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Constant submersion lower unit? Zach Propellers & Drive Systems 4 30-03-2008 10:37
(Re-)moving lower forward shrouds eyck Deck hardware: Rigging, Sails & Hoisting 6 26-10-2007 12:06
Detroit Help ep_sail Great Lakes 0 05-09-2007 00:41
Lower Cheapeake Vasco Marinas 7 05-10-2005 08:20
Lower Chesapeake Marina Vasco General Sailing Forum 1 04-05-2004 05:21


All times are GMT -7. The time now is 15:11.


Other Social Knowledge forum communities:
Cooking Forum - Sailing Forum - Early Retirement - Airstream Trailer - Aquarium Forum - Royal Forum - Book Forum - Volkswagen Touareg Forum - Jeep Wrangler Forum - Whitewater Kayaking & Rafting Forum - Fiberglass RV Forum - RV Forum - Truck Conversion - U2 Music Forum
Social Knowledge Networks
Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.2.0