Want To Buy: V drive wanted

[Mnbear]

Hi looking for good used v drive for atomic 4 to be used in a Hughes northstar 1500 35' sail boat. Thanks Roy

[SailRedemption]

I have a used Hurth 150 v drive.. Has the standard 4 bolt pattern. I am not sure what condition mechanically it is in as I is off my boats original Volkswagen Pathfinder 75hp engine. It may work for a little while, but it may last another few years.

- Ronnie...on the geaux

[Mnbear]

Thanks for the reply. I don' t think that's going to work for me. I need to have the output shaft come out toward under the engine. Yours looks like it comes out the back. Let me know if it is different. Thanks. Roy

[SailRedemption]

Originally Posted by Mnbear

Thanks for the reply. I don' t think that's going to work for me. I need to have the output shaft come out toward under the engine. Yours looks like it comes out the back. Let me know if it is different. Thanks. Roy

I'm not sure what you are asking.. The shaft comes from under the engine, and through the v drive and the coupling gets attached on the "front" of the drive.

Here's a picture when I took the coupling off the shaft. Does that clear it up for you?

- Ronnie...on the geaux

[Mnbear]

Hi not really sure. New to this. Will be going down to boat this week. Will let you know. If it would fit how much are you looking to get? Thanks Roy

[SailRedemption]

Originally Posted by Mnbear

Hi not really sure. New to this. Will be going down to boat this week. Will let you know. If it would fit how much are you looking to get? Thanks Roy

Sorry for the delay, looking for $500 for it. you pay freight

- Ronnie...on the geaux

[tmjb]

Are you still looking?

[Mnbear]

Hi thanks for reply but found atomic 4 with v drive. Working to get it up and running to go in boat this spring. This is same set up that came out of boat