Hi there I’ve included some information I found online below it comes with
Some
cables to connect to an
icom SSB they may
work with other units.
Thanks
“PACTOR-III is a
software upgrade for existing PACTOR-II modems that provides a new data
transmission mode for improved speed and robustness. PACTOR-III is not a new
modem or
hardware device. Most
current PACTOR-II modems are upgradeable to use PACTOR-III via a
software update since PACTOR-II firmware accommodates the new PACTOR-III software. Both the transmitting and receiving stations must support PACTOR-III for end-to-end
communications using this mode.”