[SOLD] Miscellaneous Boat equipment (heater, bilge pump, rope, etc)

[SuperV]

I'm moving and would like to sell boat parts I've had stored:
Prices are negotiable. I prefer using Paypal for payments. You pay shipping from zip code 20147 (Ashburn, VA).

1 * ESPAR/Eberspacher Airtronic DV5 12V diesel forced air heating kit (new). Kit was designed for a 46ft boat with two air outlets, but was never installed. Includes: Airtronic D5 (Part #52361050000), Boat Kit - includes miniature controller (Part #248999000000), EDiTH Basic diagnostic test unit (Part #221541890000), Spare Glow Plug 12V (Part #251830010100), Spare Glow Plug Screen (Part #251729060300), Muffler (Part #251226895600), Temperature Sensor (Part #251688890900), Screen 4"/100mm (Part #251729890005), Screen (2 ea) (Part #251729800001), Connector 4"/100mm (Part #251226890040), Flex Duct 6' x 4"/100mm (Part #102114380000),
90 degree Air Outlet Hood (Part #251729891000), Metal T-connector 4"/100mm (Part #201667890300), Duct Joiner (10 ea) 4"/100mm (Part #221000010007), Air Outlet (2 ea) 4"/100mm (Part #201609800900), Exhaust Tubing/Water Hose Ring (3 ea) (Part #221000501001) - new ($1,700)

1 * Blue Sea Systems 65Amp dual rotary selector switch PN# 8363 (120V/240V, 3 poles, 2 positions & OFF -- shore/genset/off) - new ($160)

1 * Lewmar 90mm synchro single block; swl 4400lbs; 12mm - 14mm rope - new ($35)

1 * Sta-Lok Long Reach Toggle & Wire Rope Terminal (1x19 1/4") - new ($50)

1 * Sta-Lok Strap Toggle End Left Hand Thread (5/8") - new ($15)

1 * Sta-Lok Fork (1x19 5/16") - new ($12)

2 * Alexander-Roberts (ARCO) FT20 Eye Jaw Toggle - Chrome-plated bronze (5/8" pin, 21/32" jaw width, 17,000 Lbs tensile strength) - new ($30 each)

1 * Harken 2660 Carbo Block 75mm single (1213lb work load, 3638 break load, 9/16"/14mm max line) - new ($35)

1 * Wichard #2473 2-3/4" Snap Shackle with Swivel Eye (2112lb work load, 4400lb break load) - new ($20)

1 * Raritan Diaphragm Pump Repair Kit f/Sea Era Toilets - DIAPUMPRK (UPC: 085462017209) - new ($15)

1 * Roca 421401 Stainless Steel Cleat (150mm/6") - new ($5)

2 * Herreshoff Style 12" Stainless Steel Cleat - ($15 each)

2 * Rule-Mate RM2000 fully automated bilge pump 12V 1-1/8" discharge - new ($100 each)

1 * Inmarsat IsatPhone Pro (new) & IsatPhone Pro Annual Emergency Plan - Includes 120 Minutes airtime ($550)

1 * Liberty Solutions Overboard Oil Protection Solution Size II (good for 35' - 50' boat) MFG# L2U, 3000 gph Capacity, port size 1" female NPT. This is used between bilge pump and through-hull to make sure you don't pump oil into the enviroment). Comes with 4 filters (good for four seasons) - $180

1 * Antique/Classic Bronze/Stainless/Wood Inner Forestay Release Lever - Highfield Lever (see attached pictures) - $200

1 * Push-Push Air Valve for Current AB/Caribe Inflatables (#AB85044-0004) - new $20

2 * Push-Push Air Valve Adapter for Current AB/Caribe Inflatables (Halkey-Roberts valve) - new $4 each

200' 1/2" Floating double braid 100% multi-filament polypropylene safety line - Bright Yellow with orange tracer. $80 ($0.40/ft!)

250' 5/8" double braid polyester yacht braid line - white with black tracer- some spots from storage - $150 ($0.60/ft!)

150' 5/8" double braid polyester yacht braid line - white with red tracer. $100 ($0.66/ft!)

400' 5/8" double braid polyester yacht braid line - white with blue tracer - some spots from storage - $225 ($0.56/ft!)

[markpl]

Do you have any pictures of the lines??

[SuperV]

Originally Posted by markpl

Do you have any pictures of the lines??

Note: the 1/2" Floating double braid has been sold

Below are pictures of the remaining lines. As you can see the lines with black & blue tracer have a few spots on them. None of the lines were ever used (didn't fit the sheaves )!

[mfotis]

I may be interested in the line.

[SuperV]

Originally Posted by mfotis

I may be interested in the line.

Sounds good - let me know details

[SuperV]

Picture of the Liberty Solutions Oil Filter

[wrwakefield]

SuperV;

I am interested in the heater and am assessing the part numbers against those I need for a back-up heater.

I will PM you if I have questions and with my offer.

Sincerely, Bill

Originally Posted by SuperV

I'm moving and would like to sell boat parts I've had stored:
Prices are negotiable. I prefer using Paypal for payments. You pay shipping from zip code 20147 (Ashburn, VA).

1 * ESPAR/Eberspacher Airtronic DV5 12V diesel forced air heating kit (new). Kit was designed for a 46ft boat with two air outlets, but was never installed. Includes: Airtronic D5 (Part #52361050000), Boat Kit - includes miniature controller (Part #248999000000), EDiTH Basic diagnostic test unit (Part #221541890000), Spare Glow Plug 12V (Part #251830010100), Spare Glow Plug Screen (Part #251729060300), Muffler (Part #251226895600), Temperature Sensor (Part #251688890900), Screen 4"/100mm (Part #251729890005), Screen (2 ea) (Part #251729800001), Connector 4"/100mm (Part #251226890040), Flex Duct 6' x 4"/100mm (Part #102114380000),
90 degree Air Outlet Hood (Part #251729891000), Metal T-connector 4"/100mm (Part #201667890300), Duct Joiner (10 ea) 4"/100mm (Part #221000010007), Air Outlet (2 ea) 4"/100mm (Part #201609800900), Exhaust Tubing/Water Hose Ring (3 ea) (Part #221000501001) - new ($1,700)

...

[SuperV]

Sounds good - thanks for looking!

[SuperV]

Here’s a list of sold items so far:

- Lewmar 90mm Block
- Harken 75mm Block
- 200’ 1/2” Floating double braid line
- Wichard #2473 Snap Shackle
- 250’ 5/8” double braid polyester line.

Thanks for looking!

[chris07732]

Interested in remaining 5/8 double braid. Sent pm

[Jolly Roger]

I'll take the Caribe air valve if you can just send a picture, so I'm sure it's my type, (Halkey-Roberts type). Also do you have the steel socket to unscrew these valves. My plastic one will not unscrew the valve.

[wrwakefield]

PM sent.

[SuperV]

Hi JollyRoger,

The valve is still available. I don’t believe I had the tool, but i’ll double-check and will send you a PM.

[SuperV]

Originally Posted by Jolly Roger

I'll take the Caribe air valve if you can just send a picture, so I'm sure it's my type, (Halkey-Roberts type). Also do you have the steel socket to unscrew these valves. My plastic one will not unscrew the valve.

Hi Jolly Roger,
The valve is 2.5" on the outside and 2" on the inside (the photos don't do the measurement exact justice). I have attached some pictures. I don't have the steel socket, but you could think about sacrificing a deep ratchet socket - just cut two kerfs on opposite sides.

Would you be interested in the adapters by any chance? I had bought two of them because they seem prone to breaking if you're not very careful while inflating.

Regards,
Volker

[SuperV]

Update:
All the line has sold now.