Want To Buy: Harken mk 1 unit 2 furler part

[plight69]

hi
I am trying to repair my old Harken mk 1 unit 2 furler, which was damaged in Cyclone Winston in Fiji last year. All I need is one connector to join two sections of foil together, but it must be for this particular model. Can anyone help? Thanks Phil Light

[Don C L]

Wow, that may be hard to find... I sure wish I could help you, don't have one but I'll keep an eye out at the swap meet next month here. Good luck!

[plight69]

Originally Posted by Don C L

Wow, that may be hard to find... I sure wish I could help you, don't have one but I'll keep an eye out at the swap meet next month here. Good luck!

Thanks!

[arch007]

hi don,

What time is the swap meet ?

arch

[stormalong]

-Have you tried calling Harken. They are very good at supporting their products.

[Don C L]

Originally Posted by arch007

hi don,

What time is the swap meet ?

arch

Boaters Swap Meet – The Log

[Robert Kriegel]

Phil:
I sold one to an individual in Mobile, AL; I believe he did not use it and still has it. but, I have long since forgotten his name. You might run an add on Mobile, AL Craigslist, and see if he responds.
I had the same problem sheared one of the foil sections, and eventually gave up trying to fix and bought a Pro Furl.
Good luck!
Bob K

[barnakiel]

I have the lower portion of Harken 1 in my boat. My boat is about 2 weeks away.

If you do not find the part, drop me a PM I will take a picture, perhaps your part is there.

Cheers,
b.

[AmericanVagrant]

Hi Phil - I recently purchased a Harken MK1 Unit 2 for my boat. I'm pretty sure that I'll have one of the leftover internal sleeves that you're looking for. Will know for sure once it's installed (in the next couple weeks). If so, I'll be in touch.

[firehorse]

Hi everyone,
I am in search of a foil for my furler system. I hit the Miami port bridge. This bridge has two big leafs wide open but the train track bridge which of a painted blue gets lost with the background and unfortunately I didn't notice it. I'll post a picture if I go through it.
I bounced back after hitting a super high rev reverse, got hung, partially went under the bridge but bounced back thanks to the current which helped me come me out. Got a big kink on a foil and haven't tried straightening it yet but have been told by Sailing Services it will be hard to near impossible to do.
If anyone has or knows where to find a replacement foil please let me know. I will greatly appreciate it.

[Freebird66]

Originally Posted by plight69

hi

I am trying to repair my old Harken mk 1 unit 2 furler, which was damaged in Cyclone Winston in Fiji last year. All I need is one connector to join two sections of foil together, but it must be for this particular model. Can anyone help? Thanks Phil Light

I have a brand new one from a Mk1 unit 1. It takes the roll pins. It is 7in. Long with a .350 hole thru the center. Side to side width is .595. Front to back width is .715.

Phil

[Freebird66]

Originally Posted by Freebird66

I have a brand new one from a Mk1 unit 1. It takes the roll pins. It is 7in. Long with a .350 hole thru the center. Side to side width is .595. Front to back width is .715.

PhilAttachment 253259

By the way your inbox is full.